The M-VAVE wireless radio is nuts, can walk around flat with guitar blasting out distortion from amp in living room...sooo much fun....seems to have a decent range as old tenement walls are thick, also liking the small case that charges the Tx and Rx and also it will charge them fully twice from the battery in the case, pretty cool, you can run 4 sets of them together so will be buying more! Has 1/4inch adapter on top of 3.5mm so you can basically make any audio device wireless
So far: 10/10
Rowin Nano flanger pedal is decent too, I can get the two effects I want so for a tenner....nuts...these pedals are £30 pretty much everywhere in UK!
So far: 8.5/10 - marked down as it's a little noisy however that could be signal chain and my fault
The front headlight in pic (two of them), seems decent quality plastic and is bloody bright, nowhere to put it yet though as not sorted out handle bar too busy problem. It comes with a remote cable and button for the audio 'bell' not that loud and makes some strange noises but seeing as I don't have a bell...
So far: 9/10 - based solely on initial impressions
Lekato looper pedal I got yesterday (in bashed box), is great fun when you get the hang of it and quite powerful too for what it is once you get your head around the foot pedal taps to start/record/stop/delete last overdub etc. USB too (shows as a folder), have already downloaded my first loop song I made, what you can also do (not tried yet), is load in a .wav file (even a full song), in to the pedal and it will play this back as a loop so you practice over the top and write/practice guitar parts, solos etc. The Lekato CubeBaby and Tank multiFX boards also have BT so can play a drum loop from drum machine on phone in to looper - now you've got a looper pedal with drums!!
EDIT: - also has a built in tuner that works well, now I have three pedals that are also double as tuners...
So far: 9/10 -you need to be nifty with your foot to get best from it
Rowin noise gate is smaller than the nano pedal and is the smallest pedal I've ever seen but works same as the other nano Rowin noise gate pedal as far as can tell, probably same electronics in it. Will need to design and print a new holder for that pedal for the 3D printed pedal board
So far: 8/10 - budget noise gate, it gates noise innit.