After market bbsxx crank drive gear

[Fordulike]

1. Lekkie bling rings
2. The programming cable
3. The gear shift sensor
4. Eggrider LCD and programmable system
5. Lekkie buzz bars
6. Installation and maintenance tool
7. AeroShell Grease 22 (for final drive regreasing)
8. DPC-14 colour display (the voltage and current reading is a useful addition)
9. Bike stand (works great with BBSxx for maintenance)

Link update for the bike stand!

 

[vfr400]

1. Lekkie bling rings
2. The programming cable
3. The gear shift sensor
4. Eggrider LCD and programmable system
5. Lekkie buzz bars
6. Installation and maintenance tool
7. AeroShell Grease 22 (for final drive regreasing)
8. DPC-14 colour display (the voltage and current reading is a useful addition)
9. Bike stand (works great with BBSxx for maintenance)

Link update for the bike stand!

Great list, but you forgot about the bag or nylon gears for the BBSHD, or just the new super-strong plastic one:

BBSHD Silent Peek Gear (Nylon Gear Replacement)

Distributors and builders of life changing electric bikes.

lunacycle.com

or metal one if you don't mind the noise:

BBSHD Ludicrous Steel Gear (Nylon Gear Replacement)

Distributors and builders of life changing electric bikes.

lunacycle.com

 

[Deere John]

Great list, but you forgot...

...also :

After market bbsxx crank drive gear

I had the exact opposite pleasure of finally getting my knees in nice and close to the frame. Probably get an extra 1.25 km/h going downhill! :D Don't knock it ! That's 1.25km gained without a dongle [emoji6] Sent from my iPhone using Tapatalk

www.pedelecs.co.uk

 

[Fordulike]

1. Lekkie bling rings
2. The programming cable
3. The gear shift sensor
4. Eggrider LCD and programmable system
5. Lekkie buzz bars
6. Installation and maintenance tool
7. AeroShell Grease 22 (for final drive regreasing)
8. DPC-14 colour display (the voltage and current reading is a useful addition)
9. Bike stand (works great with BBSxx for maintenance)
10. Hydraulic/mechanical disc brake cut-off sensors

Added the sensors, which I can't believe I overlooked from the start

 

[Fordulike]

1. Lekkie bling rings
2. The programming cable
3. The gear shift sensor
4. Eggrider LCD and programmable system
5. Lekkie buzz bars
6. Installation and maintenance tool
7. AeroShell Grease 22 (for final drive regreasing)
8. DPC-14 colour display (the voltage and current reading is a useful addition)
9. Bike stand (works great with BBSxx for maintenance)
10. Hydraulic/mechanical disc brake cut-off sensors

Updated the links to include the new Lekkie® Bling Ring BBS01/02(B) - 40 tooth and
Lekkie® Bling Ring BBSHD - 40 tooth

 

[Fordulike]

1. Lekkie bling rings
2. The programming cable
3. The gear shift sensor
4. Eggrider LCD and programmable system
5. Lekkie buzz bars
6. Installation and maintenance tool
7. AeroShell Grease 22 (for final drive regreasing)
8. DPC-14 colour display (the voltage and current reading is a useful addition)
9. Bike stand (works great with BBSxx for maintenance)
10. Hydraulic/mechanical disc brake cut-off sensors
11. Anti chainsuck device

Added anti chainsuck device, as explained in this thread;

https://www.pedelecs.co.uk/forum/threads/chainsuck-and-one-way-to-solve-the-problem.40399/

 

[Raboa]

Another alternative to Bafang crank arms.
Middleburn square taper crank arms

https://www.mountainbikecomponents.co.uk/product/ro1-square-taper/

 

[wheeliepete]

Not strictly after market parts, but spotted these Lekkie BB adapters which may be of use to peeps who like a bit of bling.

Lekkie BB86/92 Bafang Adapter

Bafang BBS01B BBS02B bottom bracket adapter for PF86/92 BB86/92 bottom brackets.

www.brightonebikes.co.uk

Lekkie PF30 Bafang adapter

Electric bike conversions in Brighton and Hove. Bespoke E-bikes with Bafang BBS01B BBS02B BBSHD motors and quality lithium-ion battery cells. E-bike fitting service. Lekkie Bling Ring stockist

www.brightonebikes.co.uk

 

[Fordulike]

1. Lekkie bling rings
2. The programming cable
3. The gear shift sensor
4. Eggrider LCD and programmable system
5. Lekkie buzz bars
6. Installation and maintenance tool
7. AeroShell Grease 22 (for final drive regreasing)
8. DPC-14 colour display (the voltage and current reading is a useful addition)
9. Bike stand (works great with BBSxx for maintenance)
10. Hydraulic/mechanical disc brake cut-off sensors
11. Anti chainsuck device
12. BBSHD motor protection

Thought I'd add the BBSHD motor protection, as I know how vunerable the cables can be that exit the motor housing. Some of you will probably be doing some serious off-roading with the BBSHD, so may be worth a punt.

Just need to find one suitable for my BBS02

 

[jarob10]

One modification I always do is upgrade the supplied cap head screws to stainless versions. The standard cap heads seize, so sooner or later you’ll be having to drill & stud extract out.

Another suggestion would be semi-permanent thread lock of the 2 cap heads which hold the anti rotation rotation plate. There is a temptation to over torque these cap heads, resulting in stripping the aluminium threads.

 

[guerney]

One modification I always do is upgrade the supplied cap head screws to stainless versions. The standard cap heads seize, so sooner or later you’ll be having to drill & stud extract out.

Another suggestion would be semi-permanent thread lock of the 2 cap heads which hold the anti rotation rotation plate. There is a temptation to over torque these cap heads, resulting in stripping the aluminium threads.

Stainless steel - yes I may well do that.

That's a very good point about the aluminium threads! Those could easily have been made a little deeper - I worried that I was going to strip mine. Don't know what fix could have been applied, rawplugs? Liquid metal? Epoxy?

 

[Nicholas Hammond]

Not strictly an aftermarket part but to my mind a useful safety addition to the handlebar controls. I have modified the wiring of a small motorcycle switch so the two switches are in series so either one will cut the circuit, the green is a momentary switch and the red a latching switch. There was also a sliding indicator switch which I removed. I have this connected to one of the brake switch connections. A dab on the green button when changing gear or press the red button to disable the motor until pressed again. Useful when doing a slow speed manoeuvre like a u turn when you don’t want the motor kicking in. Available on EBay very cheaply.

 

[guerney]

Not strictly an aftermarket part but to my mind a useful safety addition to the handlebar controls. I have modified the wiring of a small motorcycle switch so the two switches are in series so either one will cut the circuit, the green is a momentary switch and the red a latching switch. There was also a sliding indicator switch which I removed. I have this connected to the one of the brake switch connections. A dab on the green button when changing gear or press the red button to disable the motor until pressed again. Useful when doing a slow speed manoeuvre like a u turn when you don’t want the motor kicking in. Available on EBay very cheaply.View attachment 45257

Speeding up while trying to do a slow U-turn was a problem, so I changed the "Start Current" to 10%, did the trick.

That switch looks just the job for flashing my headlights at drivers, car-like. Cheers!

 

[jarob10]

Not strictly an aftermarket part but to my mind a useful safety addition to the handlebar controls. I have modified the wiring of a small motorcycle switch so the two switches are in series so either one will cut the circuit, the green is a momentary switch and the red a latching switch. There was also a sliding indicator switch which I removed. I have this connected to the one of the brake switch connections. A dab on the green button when changing gear or press the red button to disable the motor until pressed again. Useful when doing a slow speed manoeuvre like a u turn when you don’t want the motor kicking in. Available on EBay very cheaply.View attachment 45257

Yep I’ve done this mod too - especially useful on 500w+ motors. I only use the green momentary though, the red operates a ‘full beam’ handlebar light

 

[Fordulike]

1. Lekkie bling rings
2. The programming cable
3. The gear shift sensor
4. Eggrider LCD and programmable system
5. Lekkie buzz bars
6. Installation and maintenance tool
7. AeroShell Grease 22 (for final drive regreasing)
8. DPC-14 colour display (the voltage and current reading is a useful addition)
9. Bike stand (works great with BBSxx for maintenance)
10. Hydraulic/mechanical disc brake cut-off sensors
11. Anti chainsuck device
12. BBSHD motor protection

Just updated a couple of the links, to keep them current (no pun intended )

 

[Deere John]

I have an addition (again)

Hydraulic brakes with built in brake sensor:

MT5e HIGO-Closer 3-Finger Disc Brake

The number one upgrade for e-bikes and speed pedelecs is targeting the booming market for e-bikes and speed pedelecs, which have power assistance up to 45 km/h, with the new MT5e. Demanding All-Mountain and Enduro mountain bikers have...

www.bike-discount.de

You need a HIGO to Bafang adapter also:

HIGO-A-BB-B2-S3

HIGO-A-BB-B2-S3 Mini-B adapter for Magura MT4e and MT5e to connect to Bafang BBS01, BBS02 and BBSHD

www.e-bike-technologies.de

(If you don't cut and wire yourself. Problem with the brakes cables is that they are very short, like 2 dm so they will not reach as long as the original Bafang handle cables)