Search results

`cheers Saneagle did it twice nothing seemed any different I must have done something wrong because the third time it worked as you said it should. cheers for that wouldnt have sorted this without your help. Only thing that isn't right is when i scroll through power settings from high to no...

sorry its me again fitted the new pas glad i did as the old one was cracked around the magnets. put everything back together joined the learning wires powered on, the wheel spun up in the right direction, powered off and disconnected the learning wires. powered on and rotated the crank but motor...

im sure your right but i ordered one anyway didnt cost that much ill let you know how i get on thanks again Dave

think im getting there saneagle did what you said and the wheels turned as you said pulsing the wires on blue and black does it sound to like like the pas is goosed? Ive ordered one anyway hoping its that. ill let you know how the new one works thanks again for the excellent info :)

tried this and still no luck am i doing something wrong or is something faulty? Can the PAS go faulty? when green learn wires connected wheel spins and i can go through power modes up to medium on high it still spins the same as medium. turn power off disconnect green wires turn power on and...

im learning all the time lol thanks ill try it tomorrow once again thanks for your assistance im not going to be beat i hope ill let you know how i get on cheers dave

tried it backwards still no luck bridged the pins and motor did not run, and now it doesnt turn the wheel i can just hear the motor turning but no drive when the green wires are joined :( could it be the motor goosed i feel like throwing the thing in the bin lol

ok connected the 2 green wire and disconnected the loop wire turned on and display lights up . light works too. but the wheel starts spinning immediately on low gear without turning the pedals. it goes into medium speed too but when i put it on max it stays at medium speed and keeps spinning...

Hi saneagle thanks for the reply ive been out all day so only just got around to doing anything until now. So i can confirm the yellow is the ground wire on the pas connector of which ive connected the right way around with the red and black, ive coupled the other 5 wires to the motor up. So...

wow thanks Saneagle im glad i checked here first :p thanks for your experienced input, i have swapped the pins over which i believe are correct now. just not sure what i connect the blue to ? you say to the red wire but not sure which one that is. also is it the blue from the controller i...

hI guys i am just fitting a new speed controller and led to the wifes Cyclomatic cx2 just wanted to make sure i am connecting the wires correctly. the first picture shows the 2 block connectors 5 wires that go to the motor i presume they are they connected colour to colour? the other picture is...

thanks for the reply ill probably just buy a new speed controller and display all together. as the other ones are old would something like this be ok? 36V 250W/350W E-bike Scooter Brushless Speed Motor Controller with LCD Panel UK | eBay many thanks again for the advice cheers dave

thanks for the reply not sure which wires i need to look at there is a picture of the wires coming out of the controller do i just put a bridge across 2 of those got no voltage from green wire when running on new display its weird the bike wheel runs speed med. and then high ok but nothing on...

Hi all I have just replaced the display on my wife's bike cyclamatic CX2 I must have ordered the wrong one as when it arrived it had a different connector Mine is 1 black connector with 6 wires in it, the display that arrived had 3 separate connectors each with 2 wires to it. I thought no...

thanks for the reply i will try to have a look inside and try give it a clean, looks like it opens cant see any screws just seems the plastic is clipped together, if not i can purchase a new one they don't seem expensive, once again thanks for the info guys :)

just checked all connections and seem fine went out to test it and it worked fine until i went over a bump and then it started holding back again until i braked and stopped pedalling or went i through the power modes from low to high again , so it seems like a loose connection somewhere anyone...

checked all the connectors on the speed controller they all look fine and clean, its weird it works fine on low and medium just high that has the intermittent fault :(

Hi all I'm new to electric bikes and have a problem with my wife's cyclomatic cx2 she loves the bike it is perfect for her the only problem is quite often in the top power setting (high mode) the bike doesn't go any faster and just holds back at around 10 or 11 miles an hour. If you stop...