Search results

This is what you need http://www.ciclotekstore.eu/b2c/producto/2201027/2/pas-sensor-for-hollotech

I noticed you have the low voltage at a high 32v I dropped mine to 29 my keep current is 85% and running 22a, your settings at 1,3,5 7,9 are a bit on the low side, I have 20% 40% 60% 80% 100% respectively seems logical at the 5 levels, my start power I've dropped to 20% from 30

Mine is different

I have a feeling the 20amp controller is for the mg33.250 motor same as the guy in Norway who posted his settings on endless sphere and also the guys inOZ who have the max drive with motors stamped as 33.250 . These greenway are a one off batch with oddball early development motors all made as...

Dare I ask how much that cost? I may get one in as a spare and also get the nylon gear, I'm running 22amps and 85% keep current with my 48t chainwheel, gets to places fast and that's with the old battery, I just ignore the battery meter in display and use the one on the battery.. neither the...

Wow! where did you get that from Red? Is it 25amp same as original?

Yep mine was 30.9 it got slimmed down a bit,as plenty of meat on the one I ordered, going to go for a bit of a ride a little later to see if it's any good.

Note seatpost is 30.3mm

Fitted a suspension seatpost on today, I reckon it's lighter than original cast unit £31

I would go for smaller version , smaller = more agile and you can always raise seatpost or even put a dropper in place for downhills. I made mistake of a bike which was on the upper end of my size range Road use was fine , but in reality for messing about and serious stuff I was tatered as it...

I use an old tyre and a pint of petrol , saves using the cruise control.

Looks like the gauntlet has been thrown, lots of vids and receipts for medical expenses if it goes wrong please.

Remember there is a fair bit of drag on a hub motor compared with crank drive, I've had 2 hub motor units , one was an A2B metro which is geared hub , other was crystalite unit ,when battery is flat or switched off its like riding with brakes on or like permanently climbing the Matterhorn .

You could plumb for the Greenway max drive, they have One left and it's in your budget, early days for all us owners on the forum with this bike , we have tweaked it slightly ,it's got good top end speed and gears for the torque/ climbing ability, we all seem fairly pleased with the bike, and...

Minime, I would not put battery on the rear with high power bike, it will make it very unstable, especially at speed, keep it central or in a backpack with coiled wire connection so you can move about on the bike etc. Jimmy at Insat will do you a nice 15- 17ah whale pack for your downtube or...

Spotted this as type of connector on the motor looks like you could snip it off and just fit your own connectors but would then be non waterproof connection , Bafang need to get with the program a little to make these optional extras available...

This is what you need , then you can go round with a pick axe handle , some mates and give him some good old fashioned "Forest" justice. http://www.spybike.com/

Brighton plugged and tried the colour display on the bike and it works perfectly,with some if not all those functions, I'm sure he will be along to confirm.After my battery arrives from Jimmy , I'll be purchasing one for my bike.

Been out for 10 miler today , decided to check crank arm after a couple of miles Noticed what I initially thought as bearing movement but on getting my trusty Allen keys out, sure enough the left hand crank arm bolt was loose, tightened up all seems good but a bit worried if I overtighten and...

Was going to put them on a fast ebike I was building but sold project on. This is picture of them, I was going to be nervous at cutting my hydraulics and fitting the inserts,olives etc.