Search results

Thanks for your reply and advice, having researched the gnc gen 1, and your words about my possible previous current/speed setup I dont think its right for me, although it sure looks fun ! Im also concerned about the legality of using on the road and it seems like it might draw unnecessary...

well, yeah you may be right about the controller setup...i never delved into those settings. i was able to use the pedal assist power settings 1-5. I had thought to buy a similar controller again, if i went down the hub 2 mid drive option. Thanks for the link to your testing of the gnc...

ha ha, I like the image of a bmx rider in the world championships, but probably not what I'm after... i saw on ebay some 55 teeth chain ring sprockets with freewheels that fit. I thought i could use that as the basis of my homemade freewheel crank . where you thinking the 52 tooth sprocket...

hi vfr400, unfortunately that hub was stolen with the rest of the bike after a very short trial period, perhaps it could have been set up better? it was quite a heavy ride without the motor 23kgs but no particular friction points. When i used the motor it seemed the peddling added very...

Thanks Wicky thats a good idea! Im keen to get the angle grinder out and play around with some bits! when I've seen other examples of home made mid drives they often seem to use a 2 or 3 stage reduction process, using a combination of belts, pulleys and chains, looks rather complicated and im...

Hi there, I'm trying to build a low budget home made cargo e bike from the collection of old bits and pieces I have. My first e bike used s a 250watt Hesc hub motor with a 36v battery. while it gave a great electric motor experience with the throttle and pas. it felt like pedalling was just for...

Hi there, After quite a lot of head scratching and swearing, it works!!! I can confirm the Carrera vengence suntour hesc motor does wire up to the kt sinewave T-06S controller colour for colour. And it does just fit in the small space available in the frame. Only thing is, you must have...

i will try those terms too

thanks for looking

Any ideas for search terms ? I have been trying things around “carerra vengeance E bike conversion Pedelecs”

Yes I have looked loads but not found it?

I have cut the suntour waterproof connector off and am using connecter blocks and test leads to temporarily connect the wires and easily try the different combinations. The best i got was a momentary movement or a stuck sound. Im glad to hear you think the hall sensors might not be damaged...

Thanks for reply yes i did test the red and black hall wires and i get 4.23v. Then i tested each colour using the positive meter lead to the colour hall wire and the black meter lead to the black hall wire . I advanced the wheel as slowly as i could, it seemed to fall into specific places...

Hi there so maybe after rechecking the hall sensor wires they all shake about numerically 0.67- 3.74.-4.95 as I turn the wheel backwards slowly does that mean they are bad or good? The multi meter was not showing distinctly 0 or 5 v I don't think I got five volts when touching the positive and...

additional info: Last night i also tested the hall wires with a meter and found when wheel was rotated backwards meter displayed 0-5v as i turned it, on all 3 wires ( i thought that was positive and showed they were working) I then tested the motor wires with the 36 combinations found on this...

Hi there, I also have a Carrera vengence Ebike, I fried the original controller and have since bought a KT sinewave T-06S controller, pas sensor and brakes, LCD and throttle from TBK. All arrived and looks like the controller will just about fit in the small frame space. However I'm...

Ah ok I would like to see that conversion with photos I will have a look in the conversion area. im fine to cut the wires and solder less confident when it comes to diagnosing the correct colours as I doubt they match was the link to show the Julei connectors Or to show the controller itself? l

Thanks for your reply Yes, i got the display mixed up,(eyes boggled after eternity of internet searches) I should have said Display KT-LCD3 , i believe it has a button you can use for walk assist. the KT 15A sounds a better suggetion to me, if it fits in the space. Which looks quite small...

Hi there, After a failed attempt to use tool batteries with my carrera vengence e spec. I'm pretty sure I've fried the controller due to a wrong battery polarity mistake. stupid error, however....im looking for the best way to get the bike going again, It looks like I can possibly get a direct...