Search results

Well I dont really know but will check later, but doubt those Gaadi tubes will be ok for this electric moped, as much wider tyres. not only that Its far too heavy for me to keep taking it up 2 flights of stairs, ok yes my brother will help me. But to be honest I would rather use something like...

Well I have not checked the valve core yet, as been doing other things. But have ordered new valve cores. and can fit one and check if its ok after fitting. and if it is a punture fingers crossed its not. But trouble is the moped is rather heavy to lift up 2 flight of stairs, to my flat as...

Yeah but now got a dam flat tyre in back wheel. But like Nealh said it could be the valve core. I have ordered some. Like I said above I pumped up tyre to 39PSI at about 1pm checked it at 5pm and yes it was going down but slow so fingers crossed it’s the valve core. As if not it will mean...

Well I didnt check the valve for leaking, but will tomoz, I just checked tyre from when I pumped it up at about 1pm its now 5pm and it does seem to be going down again. but slowly. hope it is just the valve Yeah Im taking off with those hub covers. nearly caught Ming the Merciless today the...

Hi all just to say moped is all going great, apart from this morning, I went to take it out, but dam back tyre was flat. typical it couldnt be the front one, But I thought it was maybe a puncture, But I pumped it up to 39PSI this was at about 12.30pm. and its still hard at 3pm so maybe its not...

Yes true, by having pedals makes it legal like no tax or insurance. I know on YouTube people are using pedals, but maybe they not got long legs, Plus like i said I have bad Arthritis in my knees. I saw a similar moped on YouTube where this man says he cant use pedals as he is same long legs...

Back on the road today with moped this time went much further, all fine. I'm afraid as I'm very tall I cant use the pedals, so they are folded downwards. I can rest my feet on the pedals but find it hard when legs are long to start pedalling. Plus I have bad arthritis in knees too but its...

Yes I will be enjoying the lovely weather coming this weekend, if it wasn't for you and others here I wont have got this moped fixed, its took 4 months, but like they say " It comes to those who wait " its certainly fixed wheel using those torque arms. I must admit I was a bit cautious on...

Well moped past all the testing did about 6 short trips along a short road. and all fine. top speed 28KM/h Yes DiggyGun, can see your point, But I have spent enough on moped now. But hopefully they will last me long enough, if not will see if I can get some spares. But very much doubt it. and...

I bet you are now jumping with Joy Nealh :D Now Billyboya is finally leaving you after 4 months, well 3 months really as 1 month I had to wait for parts. for this electric moped Erider Model 15. testing day is tomoz. will do about 4 times back and forth along a short stretch of road. Is that...

Ok thanks for that.

Yes didn't think about that will do that another time, but thanks for advice. fingers crossed for Sunday testing day

Well green charge light has come on at 53.9V is that ok

At last again moped is all done, Its been 4 months. well it was 3 months, really, but after a short ride cable snapped, that was because I didn't have correct washers and 2 torque arms. plus it had fried 2 hall sensors. plus the pcb was messed up too, so had to order more which took 5 weeks...

Well somehow I had lost the original black one, And Erider sent me this one, but again that must have been for a smaller axle width as it didn't fit my 14mm axle. I think they just had a few old torque arms but not for my model This is what I have done to 1 side just got to fit a bolt in that...

Its ok makes sense now yeah I know what you mean. Well I have gone back to the original method I said about in #127 the 1st image showing yellow circles on image. I am just going to use the piece below I have drilled a hole so it lines up ok. I just couldn't get those by Erider to fit right...

Whats tow uses if needed mean. so am I ok now to go what I have on the axles.

Nealh I really appreciate your advice on those jubilee clip torque arms, Glad you mentioned they will be useless, But I have now managed to cut a piece off of each torque arms which Erider sent and grinded them shorter so hopefully I can now fix bolts where they should go, and make sure...

Ok I get confused, ok torque arms, But I have just now received the 1 from ebay, I thought it was a pair for each sides of axle but its just 1 side. but I have taken a image of how it fits. with the arm and jubilee clip. its much better plus chain is not now tight. But I don't know what's...

Oh so you used Sumatra pdf viewer, its ok I will check again. I'm still waiting for these torque washers to arrive from eBay. But feel they wont fit a 14mm axle. I have asked the seller but he didn't seem to know, and the ones Erider provided, which I don't think they are for my model 15, as...