Search results

This is the answer to sunlight problems, although they will introduce other challenges.

An alternative solution:

It’s a Uni Moke with a seat extension. https://classic-cycle.com/saddle/saddles/all-saddles/3739/seat-extension/pillion-seat/seat-cushion-for-uni-mk-carbon?c=487

One thing I have just noticed is they are tektro brake levers and they may be magnetic switches stuck on underneath. That white stuff may be double sided sticky pads. I can’t see clearly from the photographs. If that is the case then the magnets may be positioned incorrectly on the lever so...

It would be good if you could find the specifications for your gear reduction ratio and number of magnets for both P1 and P2. I know a lot of people say P1 only affects the displayed speed and P2 should be set to 0. But when I set mine up properly I got a noticeable improvement in performance...

Is C5 set to 10?

That tape on your brake switch cover is suspicious. Maybe take a closer look to see if someone has been fiddling with it. The cover should be easy to remove with a couple of small screws. Top tip, don’t drop the screws on the floor because you will never find them again. VOE.

BBSHD comes with a lights output and mine even came with a free front light. All you have to do is press the up button for a couple of seconds and the display back light comes on together with the headlight.

You can test the reed switches using your multimeter set to ohms and a couple of paper clips slotted into the red brake connector. Pull the lever and if the circuit either opens or closes then the reed switch is activating. That’s one of the things you can do safely without any power connected...

It probably deserves it after 4000 miles. Check to see if it is a freewheel or cassette before ordering. I have a feeling it is a freewheel, which are most common on older small hub motors, because they are much cheaper to manufacture. Their website is confusing. The spec sheet says it has a...

What I do like about your bike is it was built by a reputable company that is still in business manufacturing your model today. Rather than a fly by night company hoping to make a quick buck by buying a load of second rate bikes and selling them on.

Then go for a BBSHD. I bought mine from here: https://custombuilt-ebikes.co.uk/ But be aware that this motor is very powerful and you really have to be mindful of your braking performance. Also you have to consider the torque it will impose on your transmission. It produces 160 NM of torque...

It’s not a Lishui, it’s an Ananda. I thought it was Lishui at first because of the display. It’s not easy to test with waterproof connectors. You really have to do it with the controller opened up so you can prod on the right pins. Although if you start prodding on the wrong pins with the wrong...

Yeah, good choice, I’m not sure your brakes and gearbox will cope with 1000watts. Woosh has a good reputation for supplying road legal e-bike kits, both hub and mid mount, so you have a choice between bafang and tongsheng depending upon if you want cadence or torque pedal assist. If you are a...

Depends what you are after. Do you want a road or off road kit?

It doesn’t look like it has been hacked about and Ananda is proper motor/controller manufacturer. Even Smartmotion are still in business. It’s not possible to diagnose what’s going on without a multimeter to check voltages across pins and continuity of the cables. And it’s even harder when you...

I’m guessing a bit here, but that looks like a Dashi display which is compatible with a Luishi controller. The controller may be integrated into the battery holder. If it is then the good news is all of this stuff is cheap to replace.

First of all try to identify what motor and what controller you already have. Again photographs posted on here help.

You may run into problems trying to connect the switch battery to anything else apart from a switch controller. It’s integrated into the connection module and I think it’s potted, so unless you can dig out the potting and remove the controller to access the battery connections inside the...

Crikey, that’s had a hard life. It looks like the cover for the rear brake switch is missing, does the switch operate properly?