Search results

Generally its the handlebar display manual that describes the ebike configuration and operation, so if you have any identifying details on the handlebar display such as sw900, M5, or KTlcd3 use that to google for a manual pdf file. or post here, if nothing is visible perhaps one of the chaps...

probably not a good idea then.. whoops..

might be worth a punt if you pay via credit card or other protected method, could be a legit start-up with an enthusiastic marketing bod, a dual 1000w 4" fat wheeled bike with 48v 20ah samsung celled battery for 899 is a bargain.. and tbh seems a little too good i share your caution...

blue lock wire discussed here..

the manual for your headset found on the Woosh web site says err30 is a coms error with the headset. with both my KT and noname controllers shorting the red/blue wires from the controller in the headset cable allow me to run the bikes headless (without a controller) @pas level1 and with...

Price dropped to 71.99 and i pulled the trigger so give me a week or so and I can post a few in place snaps.

Great looking stealth ebike you have there, welcome along..

Same sensor i use , i can confirm its fitted on the chain side and fitting involves removing the bottom bracket and refitting with the sensor secured behind the bottom brackets external flange (sorry i dont know all the cycling terminology..).. upside down wont make a difference

brakes firmly applied the pedal at any position beyond its apex can provide a step up for a speedy mount.

I was aware of the practice when we didnt pay vat as an avoidance tactic by the seller but thought that perhaps naively that the fact that it was now charged at source that the practice had stopped. Not that it was just a 20% price hike. and pop goes my bubble!!

leaning the bike a little towards you will also lower things a few inches.. He says with a step through bike in his profile pic erhrmph!!

I was tidying up the garage in prep for bin day and as i gathered up all the ali express bags and packages that have contributed to my garage fun of late i caught a glimpse of a customs declaration for an item i spent about £25 on inc vat etc.. and its declared value was a penny?? It didnt...

well if your looking for long term testers.. ;)

With your budget your limited to the bottom end of the new ebike market or perhaps 2nd hand or even conversion kits buying a bargain 2nd hand bike for the upgrade. the best vfm and probably result would be from converting a suitable donor bike imho as your able to select a kit with the best...

welcome, glad to hear your having fun..

The diy back/brake light takes shape.. Ive whittled the led neon strip to fold in on itself twice for a 3xlight bar a few times and added 2 x orange indicator elements to each end of a nominally longer strip intended to sit at the top.. tests at 6V and 12v for running lights and brake lights...

Fwiw ive opted to add this front lamp the key feature being the 'universal input voltage' chenglish for what i understand to be a wide range of input voltages.. tho i will be running off 12v via a dc/dc converter. not in the same league as @guerney 's solution but not needed to perform...

Trust me after decades of IT fault finding ITS ALWAYS THE CABLE especially when you dont rule it out #1, is this an additional cable that plugs in between the controller and the headsets and throttle? since corrosion got in and the wires are very thin, AND a replacement also fails.. smells...

Where there is a will there is a way.. could a stiffened ratchet strap be snaked over wheels front and rear? if so then simple chock blocks to keep the wheels stationary while clamped down might work well.

OK length at 22.5cm off the ground wheels in, is just under 83cm, 82.8 by my rule, measured via w 4ft piano clamp suspended at 22.5cm off the ground on old off cuts. the vice jaws were not wide enough to cover the whole curve one end so i eyeballed it in as i wound up the clamp screw. ...