Search results

Oliver is sending me a KT-LCD3 display so I can take a look at the C parameters. My existing KT-LCD1 can only get at the P ones. Hopefully it just needs the setting for the PAS type and sensitivity altering. I didn't get chance to drag the oscilloscope out to the garage (or cut all the cable...

I fitted a Panda Pro kit last week - very straightforward. And yes, those connectors are good. The PAS disc needed a cable tie to keep it straight on my bike, but that's purely down to a chamfered bit on the shaft where the pedal crank sits.

Sadly not. I could probably rig something up if it's a simple potentiometer though. 5k Ohms seems a common value quoted. Tomorrow if I get chance I'll see if I can work out what each pin is on the PAS sensor. I see from previous posts on here it most likely would be +5V, 0V and a pulse output...

Three pins in the PAS sensor plug. It's got a yellow plastic interior.

Disconnected brake switches - no change. I tried putting all six batteries on so there's 10Ah at 38V) anyway as I had them ready - no change (not that we expected there to be any though). Checked the pins in all the connectors (they're the waterproof round black type) - though I guess it's...

Heh, yes - it flashes when I pedal forward (ie I can see it flashing when I'm cycling along normally).

I've started off by cycling slowly with the assist on 0, then increased it to 5 but there was no sound from the motor or change in the relationship between the bike's speed and the amount of effort I was turning the pedals.

I've just fitted a Panda 250W 36V Pro front hub kit to my wife's bike - all went pretty smoothly apart from the front wheel going in the wrong direction with the wire coming up the left fork. Luckily I tested it in walk mode as it said in the manual to discover that issue... So now with the...

I ordered a 26" front 250W Pro kit on Monday - everything arrived two days later. Last night I fitted it to my wife's bike. No real issues with the kit, more with the cheap mountain bike! Had to put washers on the axle to space the forks away from the motor, the casing was rubbing. PAS sensor...