Search results

Depends what you order ;-)

I learned via http://www.ebikeschool.com/how-to-build-a-diy-electric-bicycle-lithium-battery-from-18650-cells/

If you have communication proof regarding the bad workmanship contact your bank and open a 'DIRECT DEBIT INDEMNITY CLAIM' citing that there was no way that you could have opened a claim before now... say NOTHING about opening the battery and let them know returning it would incur too much...

I was refused service whilst on my bike at the drive through Burger King in Eastgate Ratail Park a month ago , but had no such problems with the McDonalds on Fishponds Road :-/

Your battery need will depend on the average round trip distance and how many times you're expecting to charge. There's many online Battery pack calculators that can help you such as https://ebikeshq.com/electric-bike-battery-pack-calculator/#Calculator but also note ... the higher the Amp...

Paralleled , with the 145ltr load you see in the profile pic I was very comfortable at levels 3 and 4 - mainly uphill and high winds on the roads 12/13 miles with juice to spare (Barnstaple to Croyde Bay and a little runaround in between :-D). The battery unit once fully charged is a cough...

Warranties are for wusses -long live hacking :p

My 500w 48v - entire kit including my (2x) 48v 14ah batteries and battery bag cost approx £350.00, but that's because I already had tools and such for filing the dropout etc. I would advise you having a gander at and part 1 and part 2. If you don't have the tools or are comfortable with the...

My gear 48v 14ah for appox £47 (its BMS protected with charger included) x2, a parallel "Y" connector (for big journeys/camping) and because I messed up, shorted the charging cable of the battery, a Female 5.5mm x 2.1mm 25cm DC Power Barrel Jack Connector the charger has a DC connector ( my...

My build handles heavy loads. I have I When I have both trailer and distance to consider I run 48v 2x14ah, I did have to purchase a motor lead extender so that I could pack the contoller and batteries in the pannier, but my day to day is just using 1x14ah and I place everything in a bike frame...

Its no problem, I removed the cassette, removed the extra gear that made it an 8sp/gear, then popped the (now 7 sp/gear) cassette back on the hub. If you don't remove the extra gear -its not an issue, you'll only be using 7sp/gears because of your shifter. Don't worry about your derailleur...

Enjoy the journey as much as the destination

Yep indeedy :D that's not a typical load thank goodness :D

With regards to my conversion, there's only been one channel that addressed all the issues I ran into and part 2 . Also, I had to use a step drill to enlarge the hole my trailer hitch but I'm ecstatic at my end results because you can't see my control box or batteries unless you inspect very...

The Channel "ebike commuter" helped me out ALOT. In the end I went for a 48V 500w rear wheel on my bike because my bike is normally hauling something, so of course I don't go at wild, I have lots of crazy inclines so - my top "I'm in control" speed is a whopping 20km ph (ebike commuter has...

My build 48v 500w was £330.00 including 2 x14ah batteries, if you want the details let me know.