Search results

@OldPedaller Maybe you could let the forum know the brand and model number of the battery, so we can search for a more definitive answer for you.

I personally wouldn't worry about it too much. Just fully charge before you leave, then charge it again when you get back. Obviously, it's dependent on the quality of the cells how much charge you will lose, but it should be minimal after only 4 months. If it has any sort of switch on the...

Some say, soundwave is actually a robot made up of recycled electric bike parts and a Pentium P5 controlling his thought processes :eek:

1. Lekkie bling rings 2. The programming cable 3. The gear shift sensor 4. Eggrider LCD and programmable system 5. Lekkie buzz bars 6. Installation and maintenance tool 7. AeroShell Grease 22 (for final drive regreasing) 8. DPC-14 colour display (the voltage and current reading is a useful addition)

You mention in your first post that you prefer riding your standard bike. You can easily tweak certain parameters, using a programming cable, to better suit the way you like riding the bike?

Aha, so there is a throttle version. I just got the impression that all versions had no throttle. Good to know :)

Interesting points! I'm just wondering if the omission of these two features is due to it being torque sensing. Owners probably just want the bike to ride just like an unpowered one, but with a little added assistance to their leg input. A throttle usually ends up with the rider using the bike...

Anyone recognize this mid drive kit on eBay and who makes it? New Mid Drive 250w Bicycle Bike Motor - Torque Sensor Not Bafang

IIRC, I get about 1000 miles out of a chain before it gives me problems. I have pretty much maxed out the programming on my BBS02, so the chain gets lots of high torque abuse. Forum peeps will have different opinions on what lube to use and when, but I apply Finish Line Dry Teflon lube every...

I've just been using KMC chains and low end Shimano cassettes on a BBS02 750w. Cheap as chips to replace. Not sure paying extra on these components is cost effective, as the BBS02 eats through them no matter what. I usually replace 2 chains to one cassette. It's the 11T cog that usually starts...

1. Lekkie bling rings 2. The programming cable 3. The gear shift sensor 4. Eggrider LCD and programmable system 5. Lekkie buzz bars 6. Installation and maintenance tool 7. AeroShell Grease 22 (for final drive regreasing)

Adam648, you did you right thing and went with a branded quality cell. Unfortunately, the Samsung 29E, as wheeliepete quite rightly mentions, is not really suited for higher discharge rates. My previous pack was 29E and it lasted about 2 years before becoming unusable. That was with the BBS02...

Dunno if either of these stabilizer bars will help :confused: https://lunacycle.com/bsbf-1-stabilizer-bar-for-bbs02-and-bbshd/ https://lunacycle.com/bsb-1-stabilizer-bar-for-bbs02-and-bbshd/ Just one comment on your build. It might be worth dropping the max amps down on the controller with a...

I've added something to the list and provided links for each: 1. Lekkie bling rings 2. The programming cable 3. The gear shift sensor 4. Eggrider LCD and programmable system 5. Lekkie buzz bars 6. Installation and maintenance tool

Hee hee, I know that my post sounds like I'm being a bit of a Steptoe, but I'm really only trying to apply the logical solution. Yes, I could replace the whole unit, but admittedly it's a bit of a faff on, as Danidl quite rightly mentions, the push fit seals can be problem when installing. Yes...

I've had a fair bit of experience with the Bristan shower units. Generally reliable, but had to replace a heating cannister, pressure regulator and outlet pipe myself on previous models. Always cheap to repair and the internal design hasn't changed too much over the years.

The front display panel comes away from the main body with zero disturbance to any seals. I can buy a new display panel for 35 quid, but I'm just after info on whether the display is driven from the main PCB or independently within the panel. I'm happy to buy a whole new shower unit, but it...

I've got a Bristan electric shower with a digital LED temperature readout on the front panel. Unfortunately, some of the display segments have failed, which means it's difficult to read the correct temperature properly. I need to know if the LED display has its own circuitry to drive the...

Field weakening... I'm confused, but boy do I like the sound of that :D

Bugger, I was hoping that deal was for a whole bike :(