Search results

hi nealh nom joy with 17amp controller, I refitted the 15amp one, and pas julet as supplied with the 350w kit, all works fine throttle and pas. trying the 17amp control;ler cannot get pas to work. I then fitted the square wave 17 amp controller but found I only got pas when I back...

thanks nealh cannot find anything obviously wrong, but have noticed the kt pas sensor which I received with the kt square wave controller ordered in error is marked kt v6, the other one ive used on my rear wheel ebc kit is kt v12l . if I turn the kt v6 clockwise on the bike the moter...

hello all I have just replaced 15amp kt controller with the 17amp on 350w rear moter kit earlier today I wrote down the pas levels 1-5 wattage readout on lcd3 display. I have changed the bullet connectors on new kt 17amp controller to xt60 as all my battery conections are xts. I have...

hello all I have yose/elife shop 350w rear hub, I have just received the kt 17amp 36/48 svp[rd sine wave controller (theres a huge amount of connecters compared to julet weatherproof 15 amp one) I have a led890 handlebar unit which is julet connecter /but comes with a adapter lead to connect...

thanks nealh is there a pic or link to 3s booster packs (are they lipos) and how many do I need /how to link to 36v/ and which charger?

hi all in the 4 years ive had an ebike kudos vita uno rear hub/3 speed led handlebar unit, I have only been caught in heavy rain twice. my local supermarket is 3 miles away and in most cases if it looks like its going to to be heavy rain I go into highest assist and get home. today a toss up...

thanks nealh and d8veh my lcd3 shows vertion 3 and is 24/36/48 compatible. I have 3 36v batteries which I swop between 2 ebikes the 350w above and 250wcd tdz2 knowing I can run the 350w /lcd3/ kt 36v/48 17amp controller set up at 36v. or 48v is a real bonus, I can see myself...

hello all I have yose/elife shop 350w 36v rear hub moter lvd3 the supplied 15amp kt controller. I have ordered the kt 36/48v svpr-17a controller which is the psw one, but ordered through aliexpress which I expect to arrive in the next couple of days as it has arrived in the uk. I have...

thanks all might swop connections on my 250w tdz2 bike to take the 17ah and softpack should get even more range?

hi all prior to fitting a wattmeter I assumed it told you what the wattage/amp hour was. in the battery. so my fully charged 17ah battery I was expecting to see a 17ah reading on wattmeter which would decrease as capacity was used up. went out the other day ,stopped 3 times battery was...

hi all when I first had my kudos vita uno ebike back in 2014 was a bit limited by range on its 10ah battery. I now have changed the rear hub moter to yosepower/elife shop 350w with 5 levels of pas /full speed throttle 15amp kt controller and is speed sensor. in the past range was the...

thanks all I was pressing the power either too soon, or holding it down for too long. all sorted trip reset

hi all i have reset trip meter on lcd3 to zero in the past .but cannot find the info on how I did it. its not in the manual I have, I seem to get into set up mode speed/miles/kph/wheel size.

fitted wattmeter but a tempory fitting about 4" above bottom bracket and affixed by cable tie. lots of pas 4 today , lcd3 showed 4 bars then dropped to 2 bars down to one bar at 36v on lcd3 screen. 25 miles covered , I found trying to see the wattmeter readout in sunlight near nigh...

thanks all for info, as yet not fitted wattmeter. full charge lcd3 shows 41.8 24.9 miles covered lcd3 shows 36.5v 2 bars showing but this will soon drop to 1 (27 miles other day down to 1 bar bike felt a bit lethargic) battery specs say cut off 28v so if display at 30v I'm near...

wattmeter on enerpack reads 42.71 so it would seem wattmeter is reading 1.1 v higher on both batteries than dvm. one reason I want to try the wattmeter is that when the lcd3 display drops to one bar out of 4 for battery capacity, I have no real idea how much is actually left, and get...

hi all I have a enerpack softpak battery which I am going to try on my 350w , I have made up a lead as follows enerpack has xt90 , so I have xt90 to xt60, with a wattmeter in between , which will then connect to controller. if I measure my bottle battery with a voltmeter I get a reading of...

hi all yesterday I decide its time to get my wattmeter sorted, by adding a male/female xt60- to the bare wires of wattmeter which are 12g and make up a lead using a xt90. having had a bit of a job to solder a xt60 in the past I have a 100w soldering iron/helping hand /solder etc, prior to...

not sure if this is the same as yours 36v 350w ebay uk

thanks all I will only fit one toolbag for the moment, so will use cable tie as suggested. my lidl paniers have 2 plastic clips which just slide over rack frame, so will use one of those as well.