Search results

It should work, I watch UK TV (illegally) online that way!! Andy

Inserting images, not finding them! I wanted to place only one image of 3 different e-bike stands, but sometimes it posts a double image. Delete one and both the same images are gone..... Andy

Simple, if you know in which country its available, install a VPN on your PC, link the VPN to that country and download it! NordVPN is very cheap and works, but other companies also produce good VPN software. This informative, after you get past the ads, about 10 seconds I hope that helps! Andy

I am having problems with inserting images, sorry! Andy

You might post a picture of the bike, from the side, encompassing the rear wheel from the middle and the motor, as I still might be able to help, as many center stands are fitted on the rear suspension, just in front of the rear wheel. Furthermore, it might also be possible to add a second...

I may be missing something, apologies if true, but I haven't owned a phone in like 20 years that did not support Bluetooth! You might like to expand on what you said, so that I can correct my thoughts, so please give FULL details. Andy

Sadly!

How about a center stand, with a leg out to both the right and the left sides... Andy

Check that they all have the same type number, and using a multi meter on Ohms, check between each "leg" and compare the results of each one...this is an un-scientific way to work, but with a bit of luck you will find one drastically different. That one is likely to be the problem. I simply...

Wiring going to the brake levers on the handlebars. Mine has two, one for each brake, but apparently some bikes have only one brake wired (I have never seen that), as for proper braking you must use both brakes together....Logical. Andy

Industry users usually see that they fail shorted. From a link:- Usually, a MOSFET will fail short first. ... Often, the gate oxide will be taken into the diffusion, too, causing a short between all three terminals. Only if the short circuit current after this first mode of failure is high...

Check with a meter that the battery is not in fail safe, that is close to or below 30 volts, though its probably a brake sensor.....as someone has already mentioned, if the battery charge level is correct. Andy

My own bike, with relatively cheap brakes, is superb in hard but progressive stopping power (I have never owned a bike with such stopping power, and its my first with disks!), but the pads last less than 1000 miles, probably a lot less (who cares!), but good braking is more important to me than...

It could even be as simple as a shorted MOSFET. Maybe more than one. Best of luck. Andy

Its good that you mentioned this for us all here, but one should still ride in a manner that believes that everyone else on the road is dangerous....on foot or on wheels.... What possibly saved him is that if I remember correctly, she stepped into the road without looking for bikes or motor...

I feel strongly that it is always correct to warn someone of such possibilities! Better safe than sorry.......we used to say!! Andy

I have seen people on UK and German TV, getting stopped by the Police, and its found out that they have never, ever had a Driving license in say 20 years or so! They simply drive carefully, follow the highway code and never/rarely get stopped. A de restricted bike, being so driven, will...

I believe you, but there are many who cannot even ring a bell, to warn walkers, and speed by at relatively high speed. My dog has never learned the highway code (does it even apply in a forest on a pathway????), and unless I see or hear a rider approaching, so that I can call her and hold her...

It is, as I understand it, really not that simple. Say for example you are not exceeding the speed limit on a normal road, and someone who has not checked up correctly that there is no traffic, steps out in front of you and gets injured. Your bike will be taken for testing, for steering...

Good move!! Andy