Search results

i have just orderd a 450w from a uk ebay seller [mateen233] does other e bike stuff. i will be using 12s lipos 5ah or 10ah.what sort of range will i get with 5000mah.hilly but nothing as bad as you. have you had any problems with the belt drive.. richard

have a look at giantshark in the uk. Lipo charger iCharger 106B-plus 250W 6s Balance/Charger http://www.giantshark.co.uk/power-battery-tester-p-406643.html http://www.giantshark.co.uk/rc-connectors-c-39_98.html good for balance leads, lipo alarm, monitors ,proper bullit connectors etc. richard

dont bother with the 4x6 charger or any other brand .the icharger is my 4th charger ive bought and its miles ahead of the others.follow the link to read all about them.This link on RCGroups its all singing and dancing.if it had hands itd make your tea. i run mine from a old pc power supply and...

i have ordered from germany 2 lots of lipos no duty top pay. if you do order pick the cheap gls shiping apx 6 days. .if you arent in when they arrive they take to the local post office for collection.i got the 15c cheapest ones 5000mah = 75 amp.more than enough. i have used lipos in rc aircraft...

throttle would not turn off same with pas.good job brake cut outs worked. this was with lipos.removed solder, back to normal. richard

yes same controler.but 16 cell lipo.i tryed soldering the shunt but it didnt like it. throttle worked all the time then wouldnt work same with pas,so scraped all the solder off. the caps in the controler are 50v same as lipos straight from charger but its still working after 300 miles i have a...

i have the 8 fun kit in 700c wheel. top speed 16mph with 36v bottle batt. 26" wheel will be a tad slower. now gone to 48v 12s lipo and will go 20 mph top on flat. i would buy the kit again as its a good starting point,and it works. and you know what youre getting.re motor and batt and bits...

yes would be intersted in module.soldering no problem. can you pm me. cheers richard

for sale Ecrazyman controler 48v 350 watt 15amp max.sensored. or can obviously be programmed to what ever voltage/amps you want. pas connector.3 speed switch connector.programming fly lead. std connectors. £30 if any one intersted i can put on ebay. post from sunny yorkshire richard 48V 350W...

just got email from ecrazyman .he has sent out wrong controler.going to send another tommorow richard

i have tryed it.it only moves a gnats wisker thats it .dont want to freeze my balls off in the garage all night if it aint gona work. Electric Motor= Latest 8Fun 36V 250W intelligent brushless Front wheel motor-QSWXK, without Hall Sensor richard

ecrazyman 48v 350w,with pas ,3 speed switch,and throttle,plus program lead. no wiring diagram.i was hoping some one could say yes or no.if no i will put on ebay and order again. i have emailed keywin. i have had cover off to trace wires back to board,to make sure i had throtle and pas wired...

yes i did specify sensorless but one with terminal for hall wires,arrived. i have seen other controlers advertised which wil do both. just wondering whether this will. usung it in a 8fun geared front hub. richard

will a ecrazyman 6 fet eb306 sensored controler work with a sensorless motor. i have a 8 fun kit running on 12 cell lipo. i wanted a controler to try a bit more power and be able to set cut off voltage. new controler arived,but i cant get it to work.wheel just moves a tiny bit. programing...

first post on here. i had trouble fitting the disk to my bike ,8 fun kit. i have glued my magnets directly to the chain wheel with epoxy no plastic disk. mark the magnets before removing from disk with a felt pen so you dont mix north/south poles. test before glueing.first time mine only...