Yamaha battery 500wh pinouts needed

[andrewelectricbike1]

Yamaha Intube 500Wh 36V Battery has anyone got the pinouts? How is this charged off the bike? Does it need a different BMS to use on another bike?

 

[soundwave]

i bet it wont even turn on unless it is connected to the motor or even get a voltage out put from the connector.

so it could work imo with a new bms but with those bbatts you will destroy it just cracking it open so if it works sell it.

 

[andrewelectricbike1]

I have 36ish on the larger connectors so I know I'll get supply. That isn't an issue really. It's whether I can charge it stand alone. Looked at the official chargers and they are ridiculously expensive. Whether someone managed to find a suitable replacement charger would be helpful tbh.

 

[soundwave]

tbh where did you get it from as sounds a bit dodgy you have no bike to fit it in or a charger.

oem batts and chargers are expensive for these bikes and those are rather new that fit in the down tube.

 

[andrewelectricbike1]

I can assure you it is above board. I'm simply asking whether anyone has worked the pinouts. Thanks for your concern though. You came across as pretty blunt and quite rude so I'll block you from this point.

 

[soundwave]

yay like i said sell it its worth more as is than you trying to make it work on anything else

 

[vfr400]

I can assure you it is above board. I'm simply asking whether anyone has worked the pinouts. Thanks for your concern though. You came across as pretty blunt and quite rude so I'll block you from this point.

He has every right to say that. It sounds dodgy to me as well. Could you explain how you came by this battery and what its serial number is to put us at ease?

 

[andrewelectricbike1]

He has every right to say that. It sounds dodgy to me as well. Could you explain how you came by this battery and what its serial number is to put us at ease?

I'll pm you thanks.

 

[andrewelectricbike1]

Notes on the BMS interesting review.

 

[vfr400]

Haibike - Yamaha: Reverse-Engineering

Man könnte auch die sendepause in deepsleep gehen, alles auf 1.8V laufen lassen und statt TXCO ein normalen nehmen nur konnte der attiny13 den nicht ansteuern. Man kann auch den DC-DC wandler gleich weglassen und das teil einzig auf der 5V signal leitung laufen lassen. Haibike - Yamaha...

www.pedelecforum.de

 

[andrewelectricbike1]

Thanks vfr I'll start translating!

 

[vfr400]

Thanks vfr I'll start translating!

Google Translate should do it automatically if you use Chrome browser.