Woosh new owner

[Woosh]

Barney2, this is the email that Andy sent to you.

It may have got stuck in your junk mail filter.


From: Andrew Hall [mailto:andy@wooshbikes.co.uk]
Sent: 24 May 2017 14:53

Hi Dave,


The controller you have there for that model of bike should be an “LSW947-9-3”. See below for what the various leads are for.


Thicker green, blue, yellow cables to motor

Red/blue/green/yellow/black – to motor (hall sensor)


Thicker red and black cables to battery


Red/green/black with large white connector to twist-grip


Red/blue/black to pedelec sensor


2x Black/grey – brake cut-outs


Red/grey – not used

Red/black – not used


Black/green AND Blue/red to control panel (790 unit on the handlebars)


Once you take the red/grey and the red/black leads out of the equation, the rest of the leads should only be able to fit in their proper place. As mentioned above the red/grey and red/black leads are not used.


Regards, Andy.


Woosh Bikes Ltd.

Sales: 01702 435566

Support: 01702 684444

www.wooshbikes.co.uk


This is the Aspen controller, you just match up the connectors and push them together. Leave the front light connector unconnected.

1) Start with the battery.
2) Connect the 790 LED panel.
Test that you can switch the LED panel on/off. Leave it off
3) Connect the motor phase wires and Hall wires
4) Connect the throttle
5) Test that the motor spins up
6) Connect the brake sensors. Test that the brake sensors cut the motor's power
7) Connect the pedal sensor. Test

Please, please, if you email support@wooshbikes.co.uk, include your forum's name.
We are not psychics!

 

[Barney2]

Ok, back on this. My controller has all the right wires. How do I order parts.

Cheers, Dave

 

[Woosh]

what do you need?
have you diagnosed the fault?
Most parts can be bought on ebay, LED panel, throttle, brake levers, even controller.
you can email support@wooshbikes.co.uk for spares - if it's specific, add a link to this thread to help us.

 

[Barney2]

Ok. I've sent an email. I've sorted the wiring from the info you've given and it fires up, thanks. just need those little parts to finish it properly now. Hoping not too expensive.

Cheers

 

[Woosh]

Hi Barney2,

Yes, I've seen the list. Andy is your man. He does not work Saturdays though, you may have to wait until Monday.