What motor could I fit in this space

[KirstinS]

I bought a shaft driven , alfine 8 hybrid (700c). Disc brakes

looking to do a front conversion for obvious reasons .

What motor options would you suggest. The bike has the following measurement (taken by my old man as I don't have the bike with me !)

36v essential so I can swap batteries , speed more important than torque for my flat commute. 20 to 22mph would be ideal, I expect to pedal all the time

Sent from my iPhone using Tapatalk

 

[Nealh]

Disc brakes a few options.
270 - 290 rpm is ideal
Q100 36v 328rpm for speed looks like it will fit, hub is 108mm dia.
Q75/85 not disc comp.

GBK
328rpm
https://www.greenbikekit.com/36v-100f-front-driving-e-bike-motors.html
Or
285rpm ideal speed.
https://www.greenbikekit.com/bafang-swxu-36v-hub-motor.html

Small Xiongda YTW6 ?

 

[Nealh]

Also if you are able to enter the old Elifebike.com for small hubs though my pc redirects me to the knew PSWPower domain.

 

[KirstinS]

Thanks Nealh

Not keen on the xiongda as I'd have to buy bare motor plus build etc

Rather buy in UK if poss.

I'll check Woosh as I initially thought the space was smaller and their hubs wouldn't fit


Sent from my iPhone using Tapatalk

 

[KirstinS]

Disc brakes a few options.
270 - 290 rpm is ideal
Q100 36v 328rpm for speed looks like it will fit, hub is 108mm dia.
Q75/85 not disc comp.

GBK
328rpm
https://www.greenbikekit.com/36v-100f-front-driving-e-bike-motors.html
Or
285rpm ideal speed.
https://www.greenbikekit.com/bafang-swxu-36v-hub-motor.html

Small Xiongda YTW6 ?

Not having much luck with swxu, outnot stock at gbk and bms battery

Xfo7 a possibility in your view ?


Sent from my iPhone using Tapatalk

 

[Nealh]

These are small though can't remember size (think they are 100mm dia) , Elifebike used to sell an identical motor under a different designation. Rpm limited either slow or fast.
https://www.greenbikekit.com/electric-motor-engine/front-hub-motor/36v-100f-front-driving-e-bike-motors.html

 

[Nealh]

Haven't found a Xofo 7, do you have link.
Just twigged Mxus XF07 .

Depends on the rpm for your cruising speed, Tony or Andy will know what their one is wound for.

 

[KirstinS]

Haven't found a Xofo 7, do you have link.
Just twigged Mxus XF07 .

Depends on the rpm for your cruising speed, Tony or Andy will know what their one is wound for.

Yes I meant xf07 not xfo7 ! I've sent Andrew an email to see what they have (i've included the bike and fork pics to help)




Sent from my iPhone using Tapatalk