It's taken a few years of discussion, disagreement, grey hair growing and solution finding but we are almost ready to launch the Wisper Wayfarer range consisting of four entirely new bikes. We will be at Eurobike first week in September and a week later at The NEC in Birmingham.
Here are a few key stages within the many thousands of hours spent by the team preparing the birth of a brand new range of Wisper Electric Bikes.
Initial idea sketches
![31658](/forum/data/attachments/29/29499-7ebdb57fca6106ce0c8d3c0a74d185ca.jpg)
Considering frame and positioning of centre motor
![31659](/forum/data/attachments/29/29500-f71e4ef7ad21d92d83ff054a51f880f3.jpg)
From drawings to 3D renders
![31660](/forum/data/attachments/29/29501-61f72c406c0db5619d24644a7034be3b.jpg)
Adding a hub motor to the range
![31661](/forum/data/attachments/29/29502-b720bb2833a114c5d240c3f96f84a5a5.jpg)
Designing and developing mudguards and front and rear racks
![31662](/forum/data/attachments/29/29503-96a03fe5f3752e5a34b7810db2494c26.jpg)
Battery case development
![31664](/forum/data/attachments/29/29505-d01c9069004a1ea8311ad421c9a3d45e.jpg)
3D printing components, to check dimensions and "look"
![31667](/forum/data/attachments/29/29508-3c86bffb6bf4c531a16210f97c1b0d81.jpg)
Hand building the first frames
![31666](/forum/data/attachments/29/29507-b0a6412f061633db65c7628fe031339d.jpg)
Painting the first frames
![31668](/forum/data/attachments/29/29509-0666cb3506bd56743138dbc909d96d10.jpg)
Ready for final tweaks...
Here are a few key stages within the many thousands of hours spent by the team preparing the birth of a brand new range of Wisper Electric Bikes.
Initial idea sketches
![31658](/forum/data/attachments/29/29499-7ebdb57fca6106ce0c8d3c0a74d185ca.jpg)
Considering frame and positioning of centre motor
![31659](/forum/data/attachments/29/29500-f71e4ef7ad21d92d83ff054a51f880f3.jpg)
From drawings to 3D renders
![31660](/forum/data/attachments/29/29501-61f72c406c0db5619d24644a7034be3b.jpg)
Adding a hub motor to the range
![31661](/forum/data/attachments/29/29502-b720bb2833a114c5d240c3f96f84a5a5.jpg)
Designing and developing mudguards and front and rear racks
![31662](/forum/data/attachments/29/29503-96a03fe5f3752e5a34b7810db2494c26.jpg)
Battery case development
![31664](/forum/data/attachments/29/29505-d01c9069004a1ea8311ad421c9a3d45e.jpg)
3D printing components, to check dimensions and "look"
![31667](/forum/data/attachments/29/29508-3c86bffb6bf4c531a16210f97c1b0d81.jpg)
Hand building the first frames
![31666](/forum/data/attachments/29/29507-b0a6412f061633db65c7628fe031339d.jpg)
Painting the first frames
![31668](/forum/data/attachments/29/29509-0666cb3506bd56743138dbc909d96d10.jpg)
Ready for final tweaks...