That's the spokes done

[Saracen]

Just re blacked my spokes, will take ages to get the masking tape off LOL

No complaints please I am happy

 

[Az.]

May I ask what was the purpose of this exercise? To me it looks like a lot of unnecessary work.

 

[Saracen]

May I ask what was the purpose of this exercise? To me it looks like a lot of unnecessary work.

Some people like things to look nice

 

[Saracen]

May I ask what was the purpose of this exercise? To me it looks like a lot of unnecessary work.

What was the point of your post ?

 

[lenny]

Salzmann Spoke Reflectors - Made With 3M Scotchlite - Pack of 10, 36 or 72 | eBay

Made with highly reflective 3M Scotchlite material with a reflective rate of 550cd/lux, helping to increase your visibility at night and in low light conditions. Easy to install - no tools required.

www.ebay.co.uk

 

[chris667]

What was the point of your post ?

Just so you know, that's quite rude.

What does it look like now they're back on the bike?

 

[sjpt]

Just so you know, that's quite rude.

What does it look like now they're back on the bike?

Maybe it was, but possibly justified in response to Az.'s earlier post?

It would be good if everyone could appreciate that different people have different priorities. That is so whether it is something cosmetic (such as colour of spokes) or more fundamental (how you want to use your bike and therefore whether hub or crank motor is more suitable).

 

[chris667]

Maybe it was, but possibly justified in response to Az.'s earlier post?

No, I don't feel it is. And speaking as another formally diagnosed neurodivergent (although I wouldn't put it on a banner and expect strangers on the Internet to treat me differently because of it) I would welcome someone pointing out to me if I was missing a social cue.

Being autistic does not give you the right to be rude.

 

[Sturmey]

Just re blacked my spokes, will take ages to get the masking tape off LOL

No complaints please I am happy

Just a tip that might help. If any of the spokes get scratched, you can use black touch up paint or even cheap black nail varnish .

 

[Saracen]

No, I don't feel it is. And speaking as another formally diagnosed neurodivergent (although I wouldn't put it on a banner and expect strangers on the Internet to treat me differently because of it) I would welcome someone pointing out to me if I was missing a social cue.

Being autistic does not give you the right to be rude.

I thought this was rude

"May I ask what was the purpose of this exercise? To me it looks like a lot of unnecessary work. "

 

[saneagle]

I thought this was rude

"May I ask what was the purpose of this exercise? To me it looks like a lot of unnecessary work. "

I too was wondering why you did it. The spokes are black in your original photo, and they looked fine to me. I'm completely puzzled, and I bet others are too. Can you please explain?

 

[Saracen]

I too was wondering why you did it. The spokes are black in your original photo, and they looked fine to me. I'm completely puzzled, and I bet others are too. Can you please explain?

VERY rusty and paint peeling off after 5 years Thanks

The "Mach 1 Sub zero" wheels are a 100% contrast to gloss black centres and spokes

I just like things to look nice. Shame about the rusty rotor

.

.

 

[thelarkbox]

Having recently re-spoked a busted wheel with shiny silver spokes to replace what was black painted, I fully understand the aesthetic requirement.. while silver spokes add to visibility at night a tad which is a real benefit, i cant help thinking they are too 'loud' for the bikes over all look.

lookin good there @Saracen

 

[Nealh]

I use stainless steel a simply wipe with a rag and all looks gleaming . Personally I would select SS over crappy painted steel any day.

 

[chris667]

I thought this was rude

If someone else is rude that doesn't mean you have to be rude back. It is always better if you aren't rude.

 

[Saracen]

Having recently re-spoked a busted wheel with shiny silver spokes to replace what was black painted, I fully understand the aesthetic requirement.. while silver spokes add to visibility at night a tad which is a real benefit, i cant help thinking they are too 'loud' for the bikes over all look.

lookin good there @Saracen

I am loud

 

[Saracen]

If someone else is rude that doesn't mean you have to be rude back. It is always better if you aren't rude.

So again you have to take it but not give it

 

[Saracen]

I use stainless steel a simply wipe with a rag and all looks gleaming . Personally I would select SS over crappy painted steel any day.

Most rude so why post, really WHY post just to be rude ???

 

[matthewslack]

I was expecting shiny stainless steel when I needed three replacement spokes 400+ miles from home back in October, but the closest shop told me 'everything is black these days' and produced exactly the right length in matching black for my wobbly wheel.

After 30 months and nearly 15,000 miles, my black spokes are rusty at every crossing where the paint has rubbed off. If I was respoking completely I'd go for shiny.

 

[Saracen]

I was expecting shiny stainless steel when I needed three replacement spokes 400+ miles from home back in October, but the closest shop told me 'everything is black these days' and produced exactly the right length in matching black for my wobbly wheel.

After 30 months and nearly 15,000 miles, my black spokes are rusty at every crossing where the paint has rubbed off. If I was respoking completely I'd go for shiny.

Mine were perfect just needed a rub down and respray

The black contrasts the white wheels