Hi, I've had my Scott Escale 2017 700 plus 8 speed Emtb with Bosch CX performance motor for just over 5yrs and no complaints apart from the cost to replace the rear cassette, I get approx 2000 miles per cassette which is about 1yrs riding, cassette, chain and sprocket usually costs me around £350. This year I tried replacing the chain early at about 0.5 on the stretch gauge but the sprockets were too far gone so put the the old chain back until its unrideable which probably will be just a few weeks, I also need to replace the free hub as the smallest cog is slipping on the splines.
I know the Ex1 has been discussed before with regards to cheaper alternatives and I have read through some previous posts but I'm not really any wiser and my lbs don't have any experience of these cassettes.
Has any one successfully changed from Ex1 cassette on their Emtb, I would appreciate any advice if it's doable and what components and set up changes would be needed, thanks in advance.
I know the Ex1 has been discussed before with regards to cheaper alternatives and I have read through some previous posts but I'm not really any wiser and my lbs don't have any experience of these cassettes.
Has any one successfully changed from Ex1 cassette on their Emtb, I would appreciate any advice if it's doable and what components and set up changes would be needed, thanks in advance.