Ok, so a replacement EX1 cassette will break the bank...does anyone know if a standard 8 speed MTB cassette has the same spacings between the cogs and would the EX1 indexing be compatible?
Could I replace the EX1 with less than 10km on it(as new- then Ebay it!) for this-
https://www.ebay.co.uk/p/SUNRACE-M6-8-speed-11-40-Wide-Ratio-MTB-Mountainbike-Cassette-Silver/26024412490?iid=132804450732&chn=ps
The only difference is loss of the 48T but then a closer set of gears obviously not the 24/32/40/48 lowest 4 with a jump of 8 teeth at present...
I'd be happy to stick with 8 speed as the chains are probably more robust- would the EX1 chain fit this cassette?? Or would I need to replace the whole drive train?
Time to buy some Vernier calipers??
Could I replace the EX1 with less than 10km on it(as new- then Ebay it!) for this-
https://www.ebay.co.uk/p/SUNRACE-M6-8-speed-11-40-Wide-Ratio-MTB-Mountainbike-Cassette-Silver/26024412490?iid=132804450732&chn=ps
The only difference is loss of the 48T but then a closer set of gears obviously not the 24/32/40/48 lowest 4 with a jump of 8 teeth at present...
I'd be happy to stick with 8 speed as the chains are probably more robust- would the EX1 chain fit this cassette?? Or would I need to replace the whole drive train?
Time to buy some Vernier calipers??