Spoke key

[Voltsnamps]

I advise buying a set or at least measuring very accurately.
Common mistake is believing all nipples to be sized by wire (spoke) gauge, no longer true, even if it was when bicycles were made in England to English sizes.
These nipples are all 14 gauge, one fits red, one fits green the other black ! , only a few thousands of an inch between them but it does matter.


My old circular spoke key, “marked in G” for comparison, all three “real” 14 g keys are sized between the 13 and the 15, from tight as a nun’s to waving a pencil in the Albert Hall !
Use the right tool

 

[guerney]

The Spokey and Topeak spoke key designs (and there are many other brands) whereby you can turn the spoke nipple without detaching the wrench are what's needed.

It'd be even better if you didn't have to lift the spoke wrench away from the nipple. There's at least two ways to make an adjustable ratcheting spoke wrench I can think of, but thus far the interwebs haven't yielded any results to my searches for a product.

 

[guerney]

That is quite an interesting take on the spokey one. I particularly like the insert idea.

Not sure why they've included a pozi-drive screwdriver bit though, as pozi-drive is primarily for wood screws.

Seems a bit of an unnecessary addon (plastic sleeve, of course I wouldn't try to undo anything tight), but I'm sure you and I have other hexagonal screwdriver bits which would fit. Why wait for next Halloween to get spokey? I'll order one, as it's half the spokey price of a genuine spokey.

 

[guerney]

Why did I think this'd be smaller? Spokey coloured packaging is a ruler. Not too spokey to use when the plastic truing wotsists arrive.

 

[guerney]

Probably ABS, feels sturdy, the "14G" fits tight around nipples well (the bike's, not mine), easy to turn. Double dong screwdriver bit is held captive by a sprung ball bearing. Inserts are easy to swap over. Inserts must be pushed into the slot right way up ie printed face down. I'm bound to lose track of where this spoke tool is too. Is this as spokey as a real spokey? I'll never know because I won't be paying £12+ unless at gunpoint.

 

[sjpt]

Why did I think this'd be smaller? Spokey coloured packaging is a ruler. Not too spokey to use when the plastic truing wotsists arrive.


View attachment 60637

Looks like false teeth with a fitting kit. Spooky rather than spokey.

 

[guerney]

Before buying the Park Tool knockoff (good tool), I rounded one nickel plated brass spoke nipple using the crap circular roulette type, it's nice to have a better tool for the job. Fits snugly around nipples, seems quite accurately made. I've got to true wheels presently on my bike, and a replacement rear wheel (old new stock from the amazing Bankrupt Bike Parts shop) needs truing, and possibly more doing to it. Will see how the existing spokes on that rear wheel cope with potholes.

 

[AndyBike]

P.S.
I'd avoid those types that have multiple options, as in Wayners post, or even the double ended ones giving 4 options.
Reason being spoke keys are prone to being dropped, and its going to be a right pain in the bum trying to find the exact slot you were using.

 

[thelarkbox]

P.S.
I'd avoid those types that have multiple options, as in Wayners post, or even the double ended ones giving 4 options.
Reason being spoke keys are prone to being dropped, and its going to be a right pain in the bum trying to find the exact slot you were using.

tape to close off all but the single useful opening on a multi size tool will save hours, I only twigged on the last fit of my wheel build

 

[guerney]

Good tip re: tape!

I don't think the slots of my particular circular nipple roulette type have perfectly parallel sides. Also, there appears to be nipple erosion. I haven't even used this tool all that much! I should throw this away. I expect there are well made nipple roulettes, but this aint one of them. Just one of the many shoddy disappointments my crook of a local bike shop owner has sold me or offered, everything in fact. Not worth buying local to my gaff. He's a million years old at least, knows a lot about bike repair and dispenses great advice, just sells crap.