Record breaking

camerart

Pedelecer
Mar 22, 2012
140
9
Dorset
Hi,

I watched with interest as Sir Bradley beat the 1hour record, and woke up with a question!

What would the minimum requirements be for an e-bike to = his time?

Camerart.
 
Last edited:

trex

Esteemed Pedelecer
May 15, 2011
7,703
2,671
I believe the BBS02 48V 750W kit can be that fast (the record is 54.536km/h). Also are most 1.5kw - 2kw direct drive kits.
The velodrome has perfect riding condition for speed, no gradient and no headwind.
 
D

Deleted member 4366

Guest
You wouldn't need a crank drive because you'd only be going one speed. Bradley's bike didn't have gears. Any motor could do it whether geared or not. It makes no difference. You just need a motor that can sustain about 500w for an hour. It would need to spin up to about 460 rpm. 72v would be a convenient voltage to get that speed. Consumption would be about 750 watts, so two 11.6ah 36v batteries in series (835wh), should do it. You'd still need a sreamlined bike and riding gear. If you wanted to do it on a normal MTB, you'd need about 1500w from the battery and a big DD motor.
 

camerart

Pedelecer
Mar 22, 2012
140
9
Dorset
You wouldn't need a crank drive because you'd only be going one speed. Bradley's bike didn't have gears. Any motor could do it whether geared or not. It makes no difference. You just need a motor that can sustain about 500w for an hour. It would need to spin up to about 460 rpm. 72v would be a convenient voltage to get that speed. Consumption would be about 750 watts, so two 11.6ah 36v batteries in series (835wh), should do it. You'd still need a sreamlined bike and riding gear. If you wanted to do it on a normal MTB, you'd need about 1500w from the battery and a big DD motor.
That's quite amazing, if Sir Brad, produced 1.5Kw for an hour.

C.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,912
6,513

now that's how fast i wanna go , for 60 miles ;)
 

Ajax

Esteemed Pedelecer
Feb 2, 2008
316
31
You wouldn't need a crank drive because you'd only be going one speed. Bradley's bike didn't have gears. Any motor could do it whether geared or not. It makes no difference. You just need a motor that can sustain about 500w for an hour. It would need to spin up to about 460 rpm. 72v would be a convenient voltage to get that speed. Consumption would be about 750 watts, so two 11.6ah 36v batteries in series (835wh), should do it. You'd still need a sreamlined bike and riding gear. If you wanted to do it on a normal MTB, you'd need about 1500w from the battery and a big DD motor.
Would you be peddling too on that contraption, or just sat on as a passenger.
  • ;)
 

camerart

Pedelecer
Mar 22, 2012
140
9
Dorset
Would you be peddling too on that contraption, or just sat on as a passenger.
  • ;)
No peddling, I was interested to see how much power Sir Brad used in an hour for that distance. In as similar e-bike as possible to Sir Brads.

C.
 
D

Deleted member 4366

Guest
If you used an electrified version of BW's bike and wore the same streamlines gear and rode it in the same velodrome, somewhere around 350w to 450w is my estimate.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,912
6,513
 

mfj197

Esteemed Pedelecer
Jul 18, 2014
553
160
Guildford
The really good time triallers / climbers can output 400 watts for an hour or so. Brad did 440 watts on one time trial but I forget which one.
 

camerart

Pedelecer
Mar 22, 2012
140
9
Dorset
If you used an electrified version of BW's bike and wore the same streamlines gear and rode it in the same velodrome, somewhere around 350w to 450w is my estimate.
Thanks d8veh, also mfj197. That seems about right.

I just had a thought about bikes I had in the 60s. BSA winged wheel and Cyclemaster. I looked up the BHP and this type of bike was about 450W also.

Incidently, I learnt to 'speedway' on a Cyclemaster on a snow covered tennis court.

C.