Hi all new to this site and looking to convert my MTB into a mid drive ebike. The problem I have is that there is not enough room within the frame for the battery, therefore looking to fit a rear pannier rack. That’s the second problem there are no fittings for the rack, can anyone recommend a rack that fits onto the seat post via a quick release clamp. I am looking to do gravel path/ canal path/ Forrest path riding . Have seen some batteries which fit onto rear racks are they any good and would their panniers work? Any help greatly appreciated, thanks Ricky
Rear pannier rack help please.
- Thread starter Ricky
- Start date
Seat clamp types are vulnerable to fatigue and I would say more so for off road trails and bumpy tracks. Thule do a rack and ride system where the fixings are solely on the rear top stays, I have one on a small frame mtb and it worked a treat, not cheap though but I found it rugged enough for S/downs riding on the off beaten tracks.
Cheers Neath, that looks a good rack, bit pricey, suppose you get what you pay for.Thanks for the info.
I have been using a seat post clamp one on my Haibike with no issues from when I bought the bike in 2015. My bike gets used roughly 50% off road and I ride in a spirited fashion and carry two full Ortleib panniers. So my experience of a seat post clamp/rear rack mounting point has been good. The bike is 6 and a half years old and has been ridden 14.260 miles so far.
Maybe something like a Topeak MTX beam rack:
Most seem to take 9Kgs, which should be much more than your battery weight.
There are options with pannier sides too if you don't want to strap the battery directly to the rack.
We have one which is plenty strong enough, but it's not a quick release like the more recent models.
About £37.
Most seem to take 9Kgs, which should be much more than your battery weight.
There are options with pannier sides too if you don't want to strap the battery directly to the rack.
We have one which is plenty strong enough, but it's not a quick release like the more recent models.
About £37.
Thules do look very strong:
OGORI Alloy Cycling MTB Bike Bicycle Cycle Pannier Rear Rack Carrier Bracket 7625727976822 | eBay
Extra strong easy to fit £19.99
Extra strong easy to fit £19.99
I bought the Thule as it was the only option I found for a rear suspension bike, since I have got rid of the suspension bike as I find hard tail much better.
Hi Peter, thanks for replying. How does the bike handle? I got advice from local bike shop to use a down type battery rather than pannier - he has a hailong battery which may just fit with some mods - not for sale. I assume a pannier battery would be easier to fit but don’t want to affect handling although won’t planning easy Forrest path canal path routes java attached pic of mtb
Standard hailong down tube battery is hidden in the bag
The weight is towards the rear but needs must nothing standard will fit in the 13 inch frame the mid-drive motor is low in the frame so the balance is not that bad
A cheap rear hub motor [plate sized] would add to much to the tail weight
The weight is towards the rear but needs must nothing standard will fit in the 13 inch frame the mid-drive motor is low in the frame so the balance is not that bad
A cheap rear hub motor [plate sized] would add to much to the tail weight
Hi Peter, have you drilled and screwed the bottoms of the battery- the battery connector to the rack? What bag did you use to cover the battery. I think this is genius, you just made my mind up to buy the standard battery as I can do as you did if it won’t fit the frame. Thank you so much
Attachments
Used three rivnuts fitted to the top of the rack you could use a piece of ply wood
Bicycle Seat Quality rear bike rack bag black cycle pannier Waterproof Rack Pack | eBay
with the bottom cut out
Cut a cardboard template to the battery size and try for size in the triangle allow extra space
Start with battery tight to the tube
Bicycle Seat Quality rear bike rack bag black cycle pannier Waterproof Rack Pack | eBay
with the bottom cut out
Cut a cardboard template to the battery size and try for size in the triangle allow extra space
Start with battery tight to the tube
That looks a comfy seat, did it come with the bike? Once you cut the bag tothe template, do you tuck the bottom of the bag between the battery carrier and the rack then tighten down the bolts into the rivinuts to secure the battery and the bag ? Once again thanks for all your help
Related Articles
-
Swytch announce new conversion kit with ‘pocket-sized’ battery- Started by: Pedelecs
-
New Swytch launches on Indiegogo, raises £100k in first hour- Started by: Pedelecs
-
Swytch to unveil 70% smaller, 50% lighter conversion kit- Started by: Pedelecs