It looks like an 'abnormal current level' if no other light is flashing with it. (Be sure to recheck this.) I am not sure what causes this. Others might know......the display flashing L.....
Light Combination | Definition |
indicator light flash(LOW level) | abnormal current level |
indicator light flash(MED level) | abnormal throttle level |
indicator light flash(LOW+MED level) | motor phase level |
indicator light flash(HIGH level) | Motor hall signal level |
indicator light flash(LOW+HIGH levels) | brake level |
indicator light flash(LOW+MED+HIGH levels) | Abnormal communicationlevel |
What does abnormal current level mean...I just had one light flashing on 790 display.It looks like an 'abnormal current level' if no other light is flashing with it. (Be sure to recheck this.) I am not sure what causes this. Others might know.
On the pendleton with the'790' unit, the flashing lights give an indication to the fault. For example, the hi and low lights flashing is a 'brake level' fault and most likely is due to switches on brake levers sticking or brake lever not fully returning to normal position. You can disconnect these to see which is faulty and bike will work. There may also be a red light led on the pas sensor behind the large front chainring which turn on with bike but flashes when you pedal.
Other codes on 790 unit for the record are,
Light Combination Definition indicator light flash(LOW level) abnormal current level indicator light flash(MED level) abnormal throttle level indicator light flash(LOW+MED level) motor phase level indicator light flash(HIGH level) Motor hall signal level indicator light flash(LOW+HIGH levels) brake level indicator light flash(LOW+MED+HIGH levels) Abnormal communicationlevel
The controller has a shunt and can measure and monitor the battery current. At start up, the current should be low as the motor is not running. (The mosfet are switched off). An abnormal high current points to a fault such as the mosfet faulty or possibly water in controller or damaged wiring etc.What does abnormal current level mean...I just had one light flashing on 790 display.
Are you saying the 790 dispay unit is faulty.The controller has a shunt and can measure and monitor the battery current. At start up, the current should be low as the motor is not running. (The mosfet are switched off). An abnormal high current points to a fault such as the mosfet faulty or possibly water in controller or damaged wiring etc.
No. The 790 is probably OK. Other than visually checking over the bike to see if there is nothing obviously faulty/ all connectors fully pluged in etc., you are probably best to return to shop, as I think there is a two year guarantee with the electrics and the indications are that there is something wrong.Are you saying the 790 dispay unit is faulty.
I have returned it they come back to me saying no fault showing.No. The 790 is probably OK. Other than visually checking over the bike to see if there is nothing obviously faulty/ all connectors fully pluged in etc., you are probably best to return to shop, as I think there is a two year guarantee with the electrics and the indications are that there is something wrong.
Sorry it is s600 display, flashing 1 red light under LI have returned it they come back to me saying no fault showing.
They have offered ne a refund, as there is no stock, I have refused a refund and advised on an exchange when in stock as the bike has gone up in price and I will be out of pocket