Oxygen s-cross mk2 4 digit code

[Cronley]

It will take you into the special setting but because the code is wrong you cant change it.

 

[Fomass90]

It will take you into the special setting but because the code is wrong you cant change it.

You think there is another code in there?

 

[Kieran12]

when entering in the 1212 code, all i can see are the following, unable to change any settings

 

[vfr400]

Did you try pressing and holding the + and - buttons on any of those screens?

 

[Kieran12]

Did you try pressing and holding the + and - buttons on any of those screens?

Will try now mate 1 second

 

[Kieran12]

Did you try pressing and holding the + and - buttons on any of those screens?

It doesn't do anything unfortunately mate, same with + button, the -button just takes you back to the main screen.

 

[Fomass90]

It doesn't do anything unfortunately mate, same with + button, the -button just takes you back to the main screen.

I couldn't get it to do anything either unless there is another code that needs to be put in

 

[Cronley]

You think there is another code in there?

I think once you access the 4 digit code screen and place the right code then you can change the other settings ,it dont matter what code you put in you can access the L.5 etc...... but cant change anything hence why I think if the right code is put in it will be able to change the setting, surly its electric and has data saved on there so there must be away. If it can be programmed dont it just need a new set of rules so to speak,.need help big time lol

 

[Fomass90]

I think once you access the 4 digit code screen and place the right code then you can change the other settings ,it dont matter what code you put in you can access the L.5 etc...... but cant change anything hence why I think if the right code is put in it will be able to change the setting, surly its electric and has data saved on there so there must be away. If it can be programmed dont it just need a new set of rules so to speak,.need help big time lol

I reckon it can only be reprogrammed by being hooked up to a computer with oxygens software

 

[iftimoaia.mihai]

Dear all,would it happen to know what model/type is the controller? My display is water damaged and i would to buy something that would work? Thanks in advance

 

[saneagle]

Dear all,would it happen to know what model/type is the controller? My display is water damaged and i would to buy something that would work? Thanks in advance

t's a Bigstone C600E