My Oxygen eMate is fine mechanically, but was always flaky electrically. As a result, it's sat unused in a garage for 2 years. To get it going again, I'll need to replace the entire electrical system, of course. I want to get it going again to use off road. My Cube Kathmandu Pro is a superb machine, but it's not happy on bumpy trails for which it wasn't designed.
I've been looking for a controller and display to start things off. The eMate has waterproof, quick-release connectors to the hydraulic disc brakes, display & PAS, so a new controller should be able to reuse those to make the change-over easier. I've found a controller on eBay here but there is one cable that says '1to4 cable (8 pin) (for throttle, ebrake, display)'. I don't have easy access to the bike to check, but will the eMate have a suitable connector for the brakes and display?
Whilst I'm here, is there a compatible display available on eBay?
I've been looking for a controller and display to start things off. The eMate has waterproof, quick-release connectors to the hydraulic disc brakes, display & PAS, so a new controller should be able to reuse those to make the change-over easier. I've found a controller on eBay here but there is one cable that says '1to4 cable (8 pin) (for throttle, ebrake, display)'. I don't have easy access to the bike to check, but will the eMate have a suitable connector for the brakes and display?
Whilst I'm here, is there a compatible display available on eBay?
