Hi all, just thought I would update you where I am with this and what my thoughts are next, so I wanted to ensure that my problems weren't down to a bad connection so to remove any chance of it being my crappy soldering I just cut all my connectors off and used wago and guess what, it was exactly the same, so it must be a controller problem.
I know one of you said AKM are a clone of Q128 (all of my Q128 have serial numbers beginning AKM) so I'm going to take a punt that anything suitable for an AKM will be good for this and then if that doesn't work I will just cut my losses and order an AKM motor.
So with that in mind can anyone recommend a controller and display for an AKM 500 watt motor that will run on throttle only
I know one of you said AKM are a clone of Q128 (all of my Q128 have serial numbers beginning AKM) so I'm going to take a punt that anything suitable for an AKM will be good for this and then if that doesn't work I will just cut my losses and order an AKM motor.
So with that in mind can anyone recommend a controller and display for an AKM 500 watt motor that will run on throttle only
