hi I have had this nagging feeling recently that when using pas level 3(highest) that it seems less powerfull than when new I year ago.
on a steep hill if changing from pas 2 to 3 there was not always any noticible increase in power, but on the flat a fair bit of difference.
nowerdays on very moderate slopes going from 2 -3 3 seems a bit lacking.
yesterday did about 10 miles a couple of short but steep hills, a long hill mode 1 then 2 ,near the top changed to 3 but had to dismount and push to the brow of hill.
then another 12 mile home 4.5 hours to recharge battery.
the bike has never got soaked but there is a fair bit of crud on the front chainring (always been a bit wary of soaking the sensor)
I am not sure how one can tell/check output etc or if in reality it really is any different to last year
thanks all
on a steep hill if changing from pas 2 to 3 there was not always any noticible increase in power, but on the flat a fair bit of difference.
nowerdays on very moderate slopes going from 2 -3 3 seems a bit lacking.
yesterday did about 10 miles a couple of short but steep hills, a long hill mode 1 then 2 ,near the top changed to 3 but had to dismount and push to the brow of hill.
then another 12 mile home 4.5 hours to recharge battery.
the bike has never got soaked but there is a fair bit of crud on the front chainring (always been a bit wary of soaking the sensor)
I am not sure how one can tell/check output etc or if in reality it really is any different to last year
thanks all