That is sub zero cool...... under 15 kilos with an 11amp/hr batt and $2,250 is about £1,500. That has to be a bargain.
If they ever get imported here, i could be well tempted.
I always wonder if there is a point to use carbon frames with e-bikes.
The carbon parts save about 1kg - 1.2kg in total weight, so the pull factor must be the curves.
Curves work in cars, making small cars look expensive - should they work the same way in bikes?
That's an old bike. We've discussed it twice before on this forum. Here's a picture of it I took 2 years ago in Shanghai. It was also on a stand at the NEC show in 2014:
That's an old bike. We've discussed it twice before on this forum. Here's a picture of it I took 2 years ago in Shanghai. It was also on a stand at the NEC show in 2014:
Like all Chinese bikes, the factory makes them then adds your branding. That's the third branding I've seen, and there's probably a lot more. I would guess that the guy that's advertising want's to get enough firm orders before committing to buying a container of them from the factory.
I think we were quite close to seeing some with Kudos written on them at one point.