Lekkie Bling Offsets - BBS01/2

[EXE Bikes]

Hi.

I have read up on Lekkie Bling rings and wanted to confirm about offsets and spacing.

I see that the BBS01 is 5.4mm and the 36t Bling is -0.8.

How do the spacers work, I assume I need to push the ring 6.2mm away from the frame?

Anyone used this setup who can clarify what I need spacer wise?

Thanks

Karl

 

[peter.c]

The 36t is almost flat if you use chain ring spacers this moves the ring further out see pic 36t with out spacers

 

[peter.c]

same with standard chain ring

 

[EXE Bikes]

How about a 42t, seems closer to the bafang one that comes with it. Are all bafang ring the same 5.4mm offset.

 

[peter.c]

lekkie copy 42tnote the dish inwards

 

[peter.c]

The best spacer to use are 1mm bottom bracket washers this moves the whole motor over
The chain wheel spacers add stress to the 5 allen bolts

 

[EXE Bikes]

Right I get you so I need to push out by at least 2mm space to get within 1.6mm from stock, maybe 2 spacers to go beyond. Thanks for the pics @peter.c

 

[EXE Bikes]

The best spacer to use are 1mm bottom bracket washers this moves the whole motor over
The chain wheel spacers add stress to the 5 allen bolts

Good shout that might be better and save me getting new longer bolts.