Hi there,
I've been a member for a long time, but never really posted, so hi to everyone!
I've been using my Koga with the Bosch Intuvia and the 400w battery on the rear rack.
Although I've done about 4000m on it over the last 4 years I haven't used it for 3 months.
When I hopped on it today and turned the HMI on I had no MPH display and no drive.
I cleaned the contacts of the HMI and the battery, did a hard reset on the battery by taking it off and pressing the button for 30secs but it didn't cure the problem.
Finally I pressed the button on the battery while it was on the bike and it sprang to life!
Now, everytime I stop and the HMI unit times out I have to press the battery button to turn the bike on.
It's not the HMI as I have a spare one I carry.
Any ideas?
Regards
I've been a member for a long time, but never really posted, so hi to everyone!
I've been using my Koga with the Bosch Intuvia and the 400w battery on the rear rack.
Although I've done about 4000m on it over the last 4 years I haven't used it for 3 months.
When I hopped on it today and turned the HMI on I had no MPH display and no drive.
I cleaned the contacts of the HMI and the battery, did a hard reset on the battery by taking it off and pressing the button for 30secs but it didn't cure the problem.
Finally I pressed the button on the battery while it was on the bike and it sprang to life!
Now, everytime I stop and the HMI unit times out I have to press the battery button to turn the bike on.
It's not the HMI as I have a spare one I carry.
Any ideas?
Regards
