imax B6

[Deleted member 4366]

Why don't you show a photo of what you have,and then we can see what you've done wrong.

 

[robdon]

ok but I will have to set it up again, i will post it later,
than you for help,
ROB

 

[robdon]

the cable I used, on the bms cable, I have to insert the six pins separate by hand, It must be a different pitch, but fit into the charging connector ok

 

[Deleted member 4366]

Can you show a photo of it with everything connected. Use this method in post #3 so that I can zoom in to see detail:
http://www.pedelecs.co.uk/forum/threads/does-the-forum-picture-upload-work.15268/

 

[robdon]

photos

[/URL][/IMG] I cant get photo bucket to work, I can upload the photos but
when I copy them I get along file, anyway here are some
ROB

 

[robdon]

the pin strip does not fit the ribbon cable, so I have to insert the pins by hand individually, I can measure the voltage of each cell on them
ROB

 

[robdon]

from photobucket

[/URL][/IMG]

 

[robdon]

I have just been going through the different programs on the imax b6 and
have one INPUT POWER LOW
cut off 11 .0 volts, do you think this is the problem, in the previous photos the pin strip looks as though it is not connected but it is, I can read the battery voltage off the end that connects to the imax
ROB

 

[Deleted member 4366]

I don't think you followed the instruction that I gave you. Follow it exactly step by step.

 

[robdon]

d8veh I printed it out as you said, I but I have had this problem before with it
I will try again[/IMG] http://i843.photobucket.com/albums/zz360/robdon6robdon/PIC0050_zpsbaa73af5.jpg[/IMG][/url]

 

[robdon]

done exactly as instructed

[/URL][/IMG]

 

[Deleted member 4366]

It works when I do it. I got the pictures now. I'll study them and get back to you. I'm a bit inundated by cats at the moment.

 

[robdon]

[/URL][/IMG]

 

[robdon]

[/URL][/IMG]

 

[robdon]

[/URL][/IMG]

 

[mountainsport]

What ever you are doing there looks good.

 

[robdon]

this is a brand new battery never been on a bike yet, is for a giant suede bike ,
must be 8 or 9 years old , the bike I mean and is as new as the day it was made.
ROB

 

[DannyK]

I don't know if it will help but when I have this no charge problem with my imax because of low voltage I tell it that they are nicad cells, it then charges and after a few minutes when the voltage rises I switch it back to lipo.

 

[robdon]

Thanks DannyK that is helpful, I will wait for d8veh to answer and see what he thinks,
ROB

 

[robdon]

I tried DannyK method did not work
ROB