Help! HELP with QR ON EBIKE

soundwave

Esteemed Pedelecer
May 23, 2015
16,751
6,445
there all the same tbh just clamp it as tight as you can or you need a frame with thru axles 12x148 boost is the new standard hub wise
 

Abzy

Pedelecer
Mar 16, 2021
175
4
there all the same tbh just clamp it as tight as you can or you need a frame with thru axles 12x148 boost is the new standard hub wise
I tightened it as hard as I could but would the dt Swiss ratchet 5mm be better ?
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,751
6,445
yes but it wont be anything like a thru axle but it depends what you use the bike for my m8 has a 1000w bafang motor he goes to work on and has dropouts and not had a problem

tho if he raced me down a mtb trail it will fall to bits
 

Abzy

Pedelecer
Mar 16, 2021
175
4
yes but it wont be anything like a thru axle but it depends what you use the bike for my m8 has a 1000w bafang motor he goes to work on and has dropouts and not had a problem

tho if he raced me down a mtb trail it will fall to bits
I use the bike for commuting that's all don't have a mtb trail where I live
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,751
6,445
well now you have the qr on the right way round it should be ok ;)


i go that fast to tesco :p
 

guerney

Esteemed Pedelecer
Sep 7, 2021
11,252
3,195
Even if you mange to tighten it further - you've filed the dropouts and every time the axle moves just a bit, steel will keep on wearing away more material from the aluminium dropouts so that over time they will become even looser. Steel putty is a composite which contains steel - not as strong as steel - so that will also wear away. Welding aluminium on will change the properties of the heated part of the aluminium frame.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,751
6,445

Abzy

Pedelecer
Mar 16, 2021
175
4
Even if you mange to tighten it further - you've filed the dropouts and every time the axle moves just a bit, steel will keep on wearing away more material from the aluminium dropouts so that over time they will become even looser. Steel putty is a composite which contains steel - not as strong as steel - so that will also wear away. Welding aluminium on will change the properties of the heated part of the aluminium frame.
So what should I do to stop it from wearing away
 

guerney

Esteemed Pedelecer
Sep 7, 2021
11,252
3,195
So what should I do to stop it from wearing away
I don't think you can. Buy a new secondhand frame. It really is the best option IMHO.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,751
6,445
So what should I do to stop it from wearing away
if you have a mid drive motor the rear drop outs are kaput you need a new frame
 
  • Agree
Reactions: guerney

soundwave

Esteemed Pedelecer
May 23, 2015
16,751
6,445
  • Informative
Reactions: guerney

soundwave

Esteemed Pedelecer
May 23, 2015
16,751
6,445
i found a new one for 50 quid hub and free hub body micro spline 12spd shitmano just needs to be laced in to his rims and spokes.

and thats on a 5k canyon bike from 2019 its a fkn heap of shite lol
 

Abzy

Pedelecer
Mar 16, 2021
175
4
i found a new one for 50 quid hub and free hub body micro spline 12spd shitmano just needs to be laced in to his rims and spokes.

and thats on a 5k canyon bike from 2019 its a fkn heap of shite lol
Link ?
 

Abzy

Pedelecer
Mar 16, 2021
175
4
Could someone find me a cheap frame and someone who's willing to take my old frame rough how much would I get out of this old frame? Since it's only been about 6-7 months
 

guerney

Esteemed Pedelecer
Sep 7, 2021
11,252
3,195
Could someone find me a cheap frame
You'll have to keep searching ebay periodically, gumtree etc. for a frame compatible with your components