Help with controller

[keastan]

Hi
Have just purchased a new 24 volt brushless controller from ecrazyman on fitting the motor runs rough nosy and fibrates when ridden. Is the controller incompatible ? If so can anyone advise where to source an alternative ?

 

[banbury frank]

Hi keastan


You have the motor running out off phase swap the green and yellow wires

on the power and hall sensor wires

so the thick yellow wire join to the thick Green wire

thick green join to the thick yellow

then join the thin yellow to the thin green

join the thin green to the thin yellow

leave the blue to blue they are OK

Hope his helps frank

 

[keastan]

frank thankyou

Hi frank
thank you so much for your quick reply, you have made my day, I had to change only the thin wires and its working O.K very much appreciated.