Good hardtail bike to convert rear hub ebike?

mt247

Pedelecer
Aug 12, 2020
111
17
Which one you think would be the best option for ebike conversion with rear hub motor(500W MXUS XF15)? After riding for a while with my hybrid with no suspension I'm going to switch it to something with 100mm front suspension. I'm mainly driving on roads (which can be in a bad shape during winter when it's snowing), bumpy gravel roads and some forest trails. I'm mainly using tyres with really high puncture protection so they are a pretty hard ride with no suspension and going +18mph/30km/h

Currently I'm thinking about to get one of these used: Cube AIM/Analog models, trek marlin 5, White xc 290, Ghost kato. Any experiences with those or do you have anything else to recommend?

Cube:
https://www.cube.eu/en/2020/bikes/mountainbike/hardtail/aim/cube-aim-blacknred-2020/ cube aim.jpg
https://www.cube.eu/en/2020/bikes/mountainbike/hardtail/analog/cube-analog-blacknflashyellow-2020/cube analog.jpg
Trek: https://www.trekbikes.com/international/en_IN_TL/bikes/mountain-bikes/cross-country-mountain-bikes/marlin/marlin-5/p/23134/trek marlin 5.jpg
White: https://whitebikes.com/xc-290-comp-20/b/2432/white xc290.png
Ghost: https://www.ghost-bikes.com/en/bikes/hardtail/bike/kato-universal-29-2021ghost kato.png

My MXUS XF15 motor:
mxus xf15.PNG
 
Last edited:

Raboa

Esteemed Pedelecer
Aug 12, 2014
787
298
52

mt247

Pedelecer
Aug 12, 2020
111
17
I don't know if this sites will help you:
I think this site is the best one to help me, very knowledgeable people here. None of those articles talked about converting them to ebike to be honest.
 

Scorpio

Esteemed Pedelecer
Apr 13, 2020
372
164
Portugal Algarve (temporary)
I have fitted rear hub motors to 2 "modern" alloy frames mountainbikes, advise you check how deep the rear dropouts are. Both of mine had quite shallow dropouts - making it difficult to stop the axle rotating under full power.
Adding a torque arm is a good choice but finding a bike with deeper dropouts would be better (maybe an older steel frame?). Expect plenty of good advice from folk here with more experience.
 
  • Like
Reactions: mt247

mt247

Pedelecer
Aug 12, 2020
111
17
I have fitted rear hub motors to 2 "modern" alloy frames mountainbikes, advise you check how deep the rear dropouts are. Both of mine had quite shallow dropouts - making it difficult to stop the axle rotating under full power.
Adding a torque arm is a good choice but finding a bike with deeper dropouts would be better (maybe an older steel frame?). Expect plenty of good advice from folk here with more experience.
Thanks for the information, didn't know about shallow dropouts before. I have 2x torque arms with my current bike and going to use on the new one also. Steel frame could be nice but there aren't many with disc brakes.
 
Last edited: