Freewheel removal tool???

[Fordulike]

I read in an earlier post, that the freewheel removal tool to buy is the Cyclepro CPT203, as it fits over a 14mm axle.
Can someone who has used this, confirm that it does indeed fit, please.

If not, can someone suggest a tool and possibly a link, to where I can buy one that does?



Workshop - Tools: Cyclepro Multi Freewheel Remover Shimano Uniglide - CPT203 | eBay

 

[mike killay]

On the socket illustrated, there is what appears to be a half inch square socket drive.
Half an inch is about 12.5 mm.

 

[Fordulike]

On the socket illustrated, there is what appears to be a half inch square socket drive.
Half an inch is about 12.5 mm.

That's what I thought, which is why I decided to throw it to the forum first.
Any suggestions where I can buy a tool that would fit?

 

[flecc]

Member Phil the Drill gave the answer in this post

As you can see in my post above in that thread, I managed to hack out a standard Shimano tool to suit, using a bit of brute force.

 

[banbury frank]

Hi I have one in my hand i tried the 14mm shaft and it fits though it round hole not square



By the way you need a good fitting spanner and a clout with a hammer these cogs are locked on tight to undo turn anticlockwise



Cyclo Freewheel Lockring Remover - Shimano UG Fit | eBay

Frank

 

[Fordulike]

Hi I have one in my hand i tried the 14mm shaft and it fits though it round hole not square


Cyclo Freewheel Lockring Remover - Shimano UG Fit | eBay

Frank

Ooooh errrrr Frank, you saucy devil

Thanks mate, looks like that's the one to go for

 

[cwah]

Would this tool work with the mac motor thread? It's a 15mm axle width
Cyclo Freewheel Lockring Remover - Shimano UG Fit | eBay

 

[I.A.N Tyler Durden]

I found this
http://www.ebay.co.uk/itm/DNP-Epoch-Freewheel-7-Speed-11-28T-with-Removal-Tool-for-14mm-Axles-/152670199327?hash=item238bda5e1f:g:L6QAAOSwTA9X3TDK

 

[Fordulike]

I found this
http://www.ebay.co.uk/itm/DNP-Epoch-Freewheel-7-Speed-11-28T-with-Removal-Tool-for-14mm-Axles-/152670199327?hash=item238bda5e1f:g:L6QAAOSwTA9X3TDK

Aha, only five years too late, but good find nonetheless

 

[Deleted member 4366]

I have some of those DNP tools if anyone is stuck.

 

[anotherkiwi]

I found this
http://www.ebay.co.uk/itm/DNP-Epoch-Freewheel-7-Speed-11-28T-with-Removal-Tool-for-14mm-Axles-/152670199327?hash=item238bda5e1f:g:L6QAAOSwTA9X3TDK

I got a freewheel, a cassette and a freewheel removal tool direct from DNP for that price. The largest cost was the China Express postage fee. If you ask for delivery by snail because you aren't in a hurry I would say half that price. They even made me a special one off sample cassette for $6.50! The declared value on the customs form for the whole lot of kit was $8...

dnp@ms11.hinet.net Darian is the person to contact.