Freego Battery Charger

[Pedro66]

I am in need of help, I have a broken Pin on my Freego Martin city Charger. I am travelling south from Dingwall can anyone assist please

 

[vfr400]

It's a standard electrical connector. Any electronics shop should be able to sort it out. You don't say exactly which one you have, and there are many different ones. If you show us a photo, we can tell you exactly where to get it fixed - like if it's a jack, take it to a PC repair shop and if it's XLR type take it to a music shop.

 

[Pedro66]

thanks for this

 

[Pedro66]

cannot send photo but it is the male black plug

 

[Andy-Mat]

cannot send photo but it is the male black plug

cannot send photo but it is the male black plug

It really needs to be both a photo and exact sizes for help here, or simply go into an electronics store and pay to have it replaced.
At worst a 30 minute job for anyone a bit DIY-ish!!!
The important bit is the polarity, which should be marked on the charger, draw the shop's attention to that, and get a friend with a digital multi meter (every e-bike should rally have one anyway) to make sure that the polarity is correct before and after.....
regards
And

 

[vfr400]

cannot send photo but it is the male black plug

Brilliant, It must be this one. can't you cut one off your vacuum cleaner?

 

[Andy-Mat]

Brilliant, It must be this one. can't you cut one off your vacuum cleaner?

And I was thinking of the DC plug, silly me!!!
regards
Andy