Ezee forks

[martin@onbike]

Can anyone help me source 28" Forks with a 1" steerer-suspension with disc tabs-able to take 28"Ezee motor wheel?
Must be cheap,as it's a cobble together project...might have to settle for 26" but with the above spec.....
Having a nightmare.

 

[Cyclezee]

Hi Martin,

Sorry, but I can't help with that one, I guess you need somebody with Mk2 Torq who is selling for parts, not something that happens very often, so your best bet is non eZee forks from eBay.

A search for "700c suspension forks" will bring up quite a lot.

Regards,

 

[martin@onbike]

Thanks John,but even the wonderous Ebay is struggling with this one.....

 

[Scimitar]

That would be a pretty rare combo, I'd suspect. Problem is, the 1" steerer was superceded long before discs became commonplace. I needed a 1" steer tube for my Claud Butler and I found a set of Bomber Z3s by pure luck that had a 1" steerer tube included, so I could swap out the later one. Even so, they weren't disc enabled, but I wonder if some later legs might fit the stanchions - something to explore.
I think you'll have to mix and match and fiddle as you go.

 

[catsnapper]

RST Trekking suspension forks would probably do what you need as they take 1" or 1 1/8" interchangeable ChroMo steerer tubes. May be a bit too expensive as the forks plus steerer would be £60-£70, but it's a practical solution.
Rose Bikes stock and sell them, no doubt other dealers have them.

Alan

 

[martin@onbike]

Thanks Alan !

 

[fatts]

There is a couple of powabyke forks on ebay but not sure of size and no response from seller yet when asked but I can let you know if you want when I hear.

 

[martin@onbike]

Would appreciate that ,thanks