Skip to content
View in the app

A better way to browse. Learn more.

Pedelecs Electric Bike Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

extra battery

Featured Replies

is it possible to use a secondary battery as an emergency power supply or just to extend range . I am thinking that it would need to be mounted on my rear rack, possibly under panniers. But how would it connect when required. I have freego eagle which has the battery pack mounted behind the seat post.

 

gray

You need to find your way to your controller compartment under the battery. In there are the thick red and black wires. you need too solder on two more thick red and black wires long enough to reach your rack. Drill a hole if you need to to get them out of the compartment, and then solder on a suitablle connector for the battery. Anderson connectors will be best because they don't have exposed pins, and this connector will be live when your other battery is on. It would be safest to have the additional battery at the same voltage. Then you can use them at the same time. If you want to experiment with a higher voltage battery, you have to make sure that you have your normal one switched off when you connect the new one otherwise severe damage will occur. Likewise, you mustn't leave a flat battery switched on when you connect a charged one.

 

A safer idea would be to bring your existing battery wires from the controller compartment up to the rack with a female connector. Put a female connector on your new battery and then run a male connector back to your controller, so that you can connect either, and/or make a "Y"connector to connect them in parallel (if both charged and same voltage).

  • Author

thanks d8veh. That sounds a bit complicated to me. Think I will just have to take it one step at a time

gray

It shouldn't be difficult at all.Effectively all you do is lengthen the wires from your battery and controller so that you can bring the connector up to the rack. Then put the same connector on your new battery, and them you can choose which you join to the controller. Should take about 15 mins max.
Perhaps the easiest option, which I do, is to cycle with a spare battery and swap them over when the first one runs out...........?

 

Ahh the Russian solution

Jeanette, That's what I intended to do, but price of second battery put me off the idea.......Del.
Perhaps the easiest option, which I do, is to cycle with a spare battery and swap them over when the first one runs out...........?

 

Yes indeed, second battery in the panniers, 2 minutes to change over and back on the road.

GaRRy, Russian solution ??........Del.

 

Old story

 

Yanks spend a fortune on designing a pen that can be used in space as normal ones no good due to lack of gravity.

 

Russian solution - use a pencil.

 

sadly in reality a urban legend but makes the point.

 

also know as KISS (Keep It Simple Stupid)

Old story

 

Yanks spend a fortune on designing a pen that can be used in space as normal ones no good due to lack of gravity.

 

Russian solution - use a pencil.

 

sadly in reality a urban legend but makes the point.

 

also know as KISS (Keep It Simple Stupid)

The Americans spent a fortune designing neat little electrical control systems for their attitude and reaction thrusters on the Apollo and subsequent craft.

One of the first American astronauts to visit the Russian Mir station

was intrigued to see "The Russian Solution" - lever valves.

KISS, indeed.

Something similar... but...

 

is it possible to use a secondary battery as an emergency power supply or just to extend range . I am thinking that it would need to be mounted on my rear rack, possibly under panniers. But how would it connect when required. I have freego eagle which has the battery pack mounted behind the seat post.

 

gray

 

I mounted the second battery on the top of the rack - photos here http://www.pedelecs.co.uk/forum/electric-bicycles/11931-what-would-happen-if-48v-alien-aurora-3.html

 

The main advantage - it is still under the panniers (hidden and protected) and I can use either battery without any hassles.

 

The main disadvantage - the weight distribution is scary!

 

I just spliced into the wires that came from the other battery and as mine are 2 different voltages, I must make sure they are not on at the same time.

The main advantage - it is still under the panniers (hidden and protected) and I can use either battery without any hassles.

 

If I leave the bike unattended then I put my spare battery in the lockable box I have on the back of the bike as I'm conscious of the high cost of the battery !

  • Author

think I may look to get a second battery that I can just put in the pannier and switch when required. I am not very technical and despite the helpful posts on here, I know that if I started messing about with wires etc, I would end up in a mess. Next question is , Does a second battery have to be exactly the same, ie from original supplier (Freego) or are there cheaper alternatives.

 

Thanks for your replies gray

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...
Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.