eMTB owners photo and ride thread.

Trevormonty

Esteemed Pedelecer
Jul 18, 2016
1,135
564
17
NZ
Had my first ride at local MTB with new bike, loving the FS and dropper seat on rough steep tracks. Swap bikes with my son on one ascent to prove I can still climb steeper tracks unassisted.
Ran into one of his classmates and gave him his first ride of ebike, he was impressed.
 
  • Like
Reactions: Paul smith

EddiePJ

Esteemed Pedelecer
Jul 7, 2013
4,632
4,013
Crowborough, East Sussex
www.facebook.com
Malcom Campbell once owned the park grounds and the Manor House which once stood there, now a pub/eatery stands on the site. As kids we would fish in Campbells lake which it was known as locally and still is to the older generations, nowadays it is just Tilgate lake. The original grounds were mahoosive and the Barclays bank near 3 bridges railway St stood as the was N/E gate house entrance to the estate. Credit to CBC though as they maintain and manage the park excellently and it is one of the most popular parks in the county, with kids adventure activities , inc zip wires etc and a nice nature centre with lots of exotic and endangered species.
I recall carrying out some forestry work at a small industrial complex somewhere within Tilgate for Tilhill when I first left school. I often wonder what happened to the estate, but would have no idea where it even was. I expect that it has been redeveloped several times since 1982!

As for rides, the Boxing Day ride didn't exactly go to plan! When I serviced both bikes last week, I hadn't at that stage received a new front sprocket for the hard tail, so foolishly just fitted the old one back on again whilst I waited for delivery. I should have known better, and also registered that all wasn't quite sounding right yesterday, but as I have a constant battle with the 11 speed SRAM set up, I put the poor gear changes and rumble down to that.
Within the distance of the ride today, chainsuck reared it's ugly head again, and that was ride over. New sprocket now fitted a moment ago, and all is good again, or as good as an SRAM 11 speed set up is ever going to be for my riding. Job tomorrow is to get a Shimano 10 speed set up in the January sales, married to a Sunrace MX3 cassette, I can once again look forward to hassle free riding.

Not a good ride.








Totally my fault, and not that of the motor system.

 
Last edited:

soundwave

Esteemed Pedelecer
May 23, 2015
16,909
6,512
DSC_0625.JPG
 
  • Like
Reactions: EddiePJ and Gubbins

soundwave

Esteemed Pedelecer
May 23, 2015
16,909
6,512
it has no rechargeable batt in this display mind and has 2 3v button batts in the back of it like the Yamaha display.

also it is made in china so must cost about 5 quid to make lol.

it also does not turn on when not connected to the bike it would seem.

tho it is a bit smaller than i thought it would be and a lot less waight.;)
 

Gubbins

Esteemed Pedelecer
it has no rechargeable batt in this display mind and has 2 3v button batts in the back of it like the Yamaha display.

also it is made in china so must cost about 5 quid to make lol.

it also does not turn on when not connected to the bike it would seem.

tho it is a bit smaller than i thought it would be and a lot less waight.;)
So if its a few grams less, how much faster will you go?:rolleyes:
 

Trevormonty

Esteemed Pedelecer
Jul 18, 2016
1,135
564
17
NZ
it has no rechargeable batt in this display mind and has 2 3v button batts in the back of it like the Yamaha display.

also it is made in china so must cost about 5 quid to make lol.

it also does not turn on when not connected to the bike it would seem.

tho it is a bit smaller than i thought it would be and a lot less waight.;)
What are power assist buttons like to use. My cripe with standard buttons is that too easy to double or triple tap eg shift from tour to off. Can't always use them without looking. How is walk button, looks like is thumb operated now which should be plus.

Bosch may make great drives but their user interfaces are way behind competition. If only I could use the Shimano Steps switches with CX drive.
 
Last edited:

soundwave

Esteemed Pedelecer
May 23, 2015
16,909
6,512
0.3 idk lol tho i have just put a crud catcher on the frame and have a rear mud guard but it dont bloody fit.

button wise they feel better than the ones on the remote but until i get it on the bike and test it cant say for sure as will prob need a software update and the shop not open till the 1st jan.
 

Gubbins

Esteemed Pedelecer
Really interested to know how hard it is to thread through the frame. Thats the only thing stopping me from buying one and LBS says they are £90 but are a bit slow in getting one, although to be fair I did say no rush.
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,909
6,512
mine came in 3 days after ordering it from Germany on my bike it is easy as i can just remove the plastic frame covers the cables go down should take about 10-15 mins to remove the old screen and replace it with purion. ;)
 

Gubbins

Esteemed Pedelecer
mine came in 3 days after ordering it from Germany on my bike it is easy as i can just remove the plastic frame covers the cables go down should take about 10-15 mins to remove the old screen and replace it with purion. ;)
Watched a vid of it and the plug looks quite big.. to go down the frame
 

soundwave

Esteemed Pedelecer
May 23, 2015
16,909
6,512
DSC_0627.JPG
 

Paul smith

Pedelecer
Mar 26, 2016
249
198
gawd eddie what you expect..i know now,t..absolute nowt....bout bikes you hammer them..fair play to you,,,wish you lived round my parts.open a few trails up for me then.....
 
  • Like
Reactions: EddiePJ

Nealh

Esteemed Pedelecer
Aug 7, 2014
20,918
8,533
61
West Sx RH
Hiccups sorted :).

https://www.strava.com/activities/812073802

31 miles today. out to the local forests for mud and glorious slippery conditions, at least I didn't have to contend with the S/D claggy clay.
Four pics from Tilgate park/Forest.

Campbell's lake looking north.
DSCF0002.JPG

Adventure activity centre up in the pine trees.
DSCF0003.JPG

DSCF0004.JPG


Picking a route through this lot.
DSCF0005.JPG
 
Last edited:

mountainsport

Esteemed Pedelecer
Feb 6, 2012
1,419
298
View attachment 16982 View attachment 16983 View attachment 16982 View attachment 16983 View attachment 16984 View attachment 16985 Hiccups sorted :).

https://www.strava.com/activities/812073802

31 miles today. out to the local forests for mud and glorious slippery conditions, at least I didn't have to contend with the S/D claggy clay.

Campbell's lake.
View attachment 16982

Adventure activity centre up in the trees.
View attachment 16983 View attachment 16984

Picking a route through this lot.
.View attachment 16985
What time was that picture taken at the lake? Lovely!

MS
 

Nealh

Esteemed Pedelecer
Aug 7, 2014
20,918
8,533
61
West Sx RH
  • Like
Reactions: mountainsport

soundwave

Esteemed Pedelecer
May 23, 2015
16,909
6,512
DSC_0628.JPG DSC_0629.JPG
 
  • Like
Reactions: Paul smith

EddiePJ

Esteemed Pedelecer
Jul 7, 2013
4,632
4,013
Crowborough, East Sussex
www.facebook.com
SW do me a favour when you fit the display. Wrap the wire around the handlebars a couple of times. It doesn't look as athletically pleasing, but it does help to prevent it from snagging up and getting caught on undergrowth.

So few people or even manufacturers do this, but it could help prevent a costly mistake.

at least I didn't have to contend with the S/D claggy clay.
I'm not working on Wednesday and was half thinking of venturing back down to the S/D, but as you say the clay there plays havoc.

Not sure that even I want a repeat of this, which as you know is pretty typical of riding there when things get wet and sticky. :( This was also the day that I decided that my SD guided tours idea was never going to work.

 
Last edited:

Related Articles

Advertisers