I've spent a good few hrs now trying to get my head round this controller I've had some help from a great member on here. I've sussed a few bits. But others in lost on.
On off button.
+ And - buttons.
So far I have learnt
Pressing the + button and holding turns on front light.
Pressing and holding - button shows a walk icon but doesn't change nothing.
Holding power button turns on and off.
Now holding +&- at same time takes me into menu and or out off menu.
Looking in general I found guides.
Some seems to tie up others open up questions.
P01 = LCD brightness. All good
PO2 = mph or kph. All good
P03 = volts 24 36 48. All good
P04 = sleep timer. All good
P05 = I'm not understanding totally.
0= throttle disconnected
1= motor will start to assist from peddles or throttle if other settings allow.
2= throttle only not peddle assist. (Not EAPC)
P06 is apparently wheel size. Now this I would kinda agree, but if I alter this it alters my max speed on Speedo In line but feels no different. ???? Ps my wheels are 14inch
So if I say the 5 inches it limits to 5mph, if I say it's 50inch it limits to 52mpg. 14 is 15.4mpg
P07 = magnet speed test. NOW I HAVE NO IDEA ON THIS, WHAT DOES IT MEAN AND MAY HAVE ADJUSTED IT
P08 = Speed limiter apparently. It goes from 0-100 choices but does not seem to make a difference.
P09 = drive IE ? Whether O auto or 1 kick. Please explain???
P10 = 0 no throttle. 1 throttle only (none eapc legal) 2 throttle assist. (Eapc Legal or not?
P11 = 1 to 24 sensitivity I believe with 24 being higher sensitivity. Is this to peddles ?
P12 = 1 to 5 power assist intensity range. Is 5 high and controls acceleration aggressiveness ?
P13 = magnets ??? Not touched.
P14 = amps. Pretty straight forward
P15 = no idea no adjustment available
P16 = odo readying and reset ability.
Really hoping someone in Ss13 Ss14 ss15 or ss16 could personally help me but in mean time I can learn via online.
Help
-
On off button.
+ And - buttons.
So far I have learnt
Pressing the + button and holding turns on front light.
Pressing and holding - button shows a walk icon but doesn't change nothing.
Holding power button turns on and off.
Now holding +&- at same time takes me into menu and or out off menu.
Looking in general I found guides.
Some seems to tie up others open up questions.
P01 = LCD brightness. All good
PO2 = mph or kph. All good
P03 = volts 24 36 48. All good
P04 = sleep timer. All good
P05 = I'm not understanding totally.
0= throttle disconnected
1= motor will start to assist from peddles or throttle if other settings allow.
2= throttle only not peddle assist. (Not EAPC)
P06 is apparently wheel size. Now this I would kinda agree, but if I alter this it alters my max speed on Speedo In line but feels no different. ???? Ps my wheels are 14inch
So if I say the 5 inches it limits to 5mph, if I say it's 50inch it limits to 52mpg. 14 is 15.4mpg
P07 = magnet speed test. NOW I HAVE NO IDEA ON THIS, WHAT DOES IT MEAN AND MAY HAVE ADJUSTED IT
P08 = Speed limiter apparently. It goes from 0-100 choices but does not seem to make a difference.
P09 = drive IE ? Whether O auto or 1 kick. Please explain???
P10 = 0 no throttle. 1 throttle only (none eapc legal) 2 throttle assist. (Eapc Legal or not?
P11 = 1 to 24 sensitivity I believe with 24 being higher sensitivity. Is this to peddles ?
P12 = 1 to 5 power assist intensity range. Is 5 high and controls acceleration aggressiveness ?
P13 = magnets ??? Not touched.
P14 = amps. Pretty straight forward
P15 = no idea no adjustment available
P16 = odo readying and reset ability.
Really hoping someone in Ss13 Ss14 ss15 or ss16 could personally help me but in mean time I can learn via online.
Help
-
