Help! Ebike KT Controller-LCD3 and Alarm with LOCK function?

[Adam Bodolai]

Hi everyone,
I would like to ask for some help with Ebike KT Controller-LCD3. I would like to add an alarm function to the controller to block the motor. Is there something you can help with?

 

[Nealh]

There's nothing in the software to allow this to happen.
Though what you can do is add a password via C9 in the settings then only you will have access to unlock the screen.

 

[Adam Bodolai]

There's nothing in the software to allow this to happen.
Though what you can do is add a password via C9 in the settings then only you will have access to unlock the screen.

Thank You,

 

[vfr400]

Whatever you do, don't forget the password. There's no way back. Also, one guy mis-typed his and wasn't sure what the mistake was, so he was locked out. Personally, I wouldn't risk it. Get yourself a nice bikelock instead or put a secret switch on the red wire to the LCD.

 

[Adam Bodolai]

Whatever you do, don't forget the password. There's no way back. Also, one guy mis-typed his and wasn't sure what the mistake was, so he was locked out. Personally, I wouldn't risk it. Get yourself a nice bikelock instead or put a secret switch on the red wire to the LCD.

Many thanks,