Controller LCD-P3C E-bike UrbanGlide C7

[jamesnotti]

I think that the usb-port is not intended for customer use.

 

[darren29]

hi i have the same display p3c on a troy RD5 fat-bike but i'm not sure if mine can support cruise control. i have the thumb throttle enabled but for the rest how can i activate it and see if it actually works for me

 

[saneagle]

hi i have the same display p3c on a troy RD5 fat-bike but i'm not sure if mine can support cruise control. i have the thumb throttle enabled but for the rest how can i activate it and see if it actually works for me

Cruise control is pretty useless and unsafe. it sounds like a good idea, but when you try it, you see that it isn't.

Do you have pedal assist? if you do, you don't need cruise controll anyway because it's more or less the same.

You can make a better cruise control with any throttle. Just take out the spring. You need a bit of friction to hold it in place, so if you have a thumb-throttle, push it up against the brake lever or anything else.

Here's a really great cruise control added to a bike with no PAS using a re-purposed handlebar clamp. The clamp has a small bar screwed to it that works as a stop for the thumb lever. It's clamped just tight enough so that you can rotate it with your thump into any position and hold the throttle there. Cost zero, time to make about 5 minutes.

Home made Cruise Control

I had a bell that was not very good, so I cut the bell off and used the bracket that goes around the handle bar. I drilled a hole in a small piece of plastic and screwed it in from the top rather than how it was through the bottom. I then put the bell bracket on after the throttle and then...

www.pedelecs.co.uk

That was December 2012. Happy days. I see Morphix and Jeremy there. I wonder what happened to them?

 

[sauth]

Does anyone know what all the P codes do for the p3c display? Also the error codes. It would be very useful if it was in the form of a list.

 

[Miki90]

Salve piacere Michele mi sono iscritto appena volevo chiederti un favore. Io ho acquistato questo display LCD x la mia bici elettrica fiido m1 pro vorrei sapere se compatibile grazieHo appena trovato questo fantastico articolo su AliExpress. Dai un'occhiata! 22,91€| 24V 36V 48V P3C bici elettrica Display LCD Meter E Scooter pannello LCD con USB UART per parti di bici elettrica da montagna (5pin)

Page Not Found - Aliexpress.com