Complete Wheel set for 29er

[IR772]

I would like another set of wheels to have a different tyre selection, it seems a lot easier to change wheels than tyres.

Is it as simple as buy the bits and put them together ? I want to drop in and out different wheels with everything fitted.

Not looking for a Rolls Royce, Mondeo will do me fine, just want good quality and works. Are these the right size bits and is it straight forward to put together.

From Chain reaction does this look right for my Sduro 29 SL, will use tubes.

Open to advice as I know nothing about it at all. Preference is to buy all from one supplier for ease.

Wheels
http://www.chainreactioncycles.com/kore-xcd-mtb-wheelset-2016/rp-prod109565

Brake disc 180mm
http://www.chainreactioncycles.com/shimano-xt-rt76-6-bolt-disc-rotor/rp-prod39007

Cassette
http://www.chainreactioncycles.com/shimano-deore-hg50-10-speed-mtb-cassette/rp-prod124932

 

[soundwave]

looks all ok to me tho the wheels dont have sealed bearings but they are bottom end wheel set.

discs just bolt on and same with the cassette tho you need this to tighten it on the wheel.
http://www.tweekscycles.com/Product.do?method=view&n=3338&p=23018&d=124&c=4&l=2&utm_source=Google&utm_medium=Base&utm_campaign=Tools & Maintenance&gclid=CjwKEAiA0fnFBRC6g8rgmICvrw0SJADx1_zAGGOXc7mSiD7eRCxNXRQe07POPH-NEKIFXgi0Dx-duxoCrbDw_wcB

 

[IR772]

When you say bottom end you mean cheap not some technical description ?

A sealed bearing set will cost and an example might be ?

 

[soundwave]

http://www.chainreactioncycles.com/crank-brothers-cobalt-2-29-mtb-wheelset-2016/rp-prod152915

 

[IR772]

Also want the quick release skewers fitted etc

 

[soundwave]

http://www.chainreactioncycles.com/dt-swiss-rws-mtb-steel/rp-prod81161

decent wheel sets dont come with any of that

https://www.crankbrothers.com/accessories_split-qr-skewer

 

[IR772]

Still all good in the price range happy to go for that.

Any thing else tool wise to fit the cassette ?

 

[soundwave]

you will need a chin whip to remove it thats all you need imo.

my cb wheels when new in 2014 was £500 each.

 

[IR772]

This one ok

http://www.chainreactioncycles.com/park-tool-sprocket-remover-chain-whip-sr-1/rp-prod5646

Do I have to get that
Park Tool FR4C as it will have to come from tweeks

 

[soundwave]

yeah you might as well as you will have to take it off one day when it is worn out.

 

[IR772]

Including a set of elbow protectors that is £ 370, so a bargain compared to just one of yours. I did not want the best, just good, which is fine for me.

Thank you for your advice, I will put the pictures up when I have built them. Or bring them down for you to put right if it all goes Pete Tong.

 

[soundwave]

there cheaper now mind.
https://www.winstanleysbikes.co.uk/product/70696/Crank_Brothers_Iodine_3_27_5_Inch_Wheelset_Black_Silver?gclid=CjwKEAiA0fnFBRC6g8rgmICvrw0SJADx1_zAn21UKrOv0lTsnUSA56nM3BwBUhQGjX-I_lN136GVLxoC8dvw_wcB

 

[IR772]

Those cobalt wheels look good and they are eBike rated.

Also a very complementary reviewer said:

"Excelente roda, me enviaram com todos os acessórios para usar em vários tamanhos de suspensão, enviaram também os bicos para tubeless, tudo perfeito, muito bem embalado também"

Who could argue with that ?

 

[soundwave]

there tubeless ready as well no rim tape needed

 

[IR772]

Not sure tubeless is for me.

 

[soundwave]

you will need some valves if you do not sure if they come with any or not?

 

[Pinoy-E-MTBer]

Since you're buying a new wheelset,tires,etc...You want to look into a 27+ setup. I'm sure you'll have plenty of clearance with your 29er.

Definitely go tubeless to minimize the possibility of flats too.

 

[Pinoy-E-MTBer]

Another thing to watch out for is hub and axle sizes. The ones you looked at got QR axles. You may have thru axles on your bike.

 

[soundwave]

err they come with both end caps for axle or qr.

 

[Pinoy-E-MTBer]

err they come with both end caps for axle or qr.

Cool!


Sent from my iPhone using Tapatalk Pro