Compatible socket for Bosch light plug?

[aegidius]

Looking for the nanoMQS plugs and sockets like the ones used on Bosch ebikes... I found the female plug* used for lights cables, but there's no sign of any matching male pin socket. Has anyone seen them, or have Bosch got this locked up in a proprietary design? It would be useful, for example, in a splitter for powering lights (one plug to two sockets). The tuning dongles (volspeed, speedbox, etc) do have them, but they may have had to resort to 3D printing.

* - part no. 2141467-1, -2, -3. Like this one.

 

[soundwave]

Bosch eBike light cable headlight - 1400mm

Original Bosch e-bike headlight light cable . Replace a broken cable or retrofit a lighting system on your e-bike. The Bosch light cable is required…

www.ebike24.com

 

[aegidius]

Bosch eBike light cable headlight - 1400mm

Original Bosch e-bike headlight light cable . Replace a broken cable or retrofit a lighting system on your e-bike. The Bosch light cable is required…

www.ebike24.com

Yeah that's the plug - I'm trying to find the socket that it plugs into.

 

[aegidius]

TE Connectivity are the only mfgr for the plugs, and they don't make a socket. However, I have solved the problem. I saw a picture of a Peartune derestrictor, and they use two plugs nose-to-nose with pins in between. Add I needed then was the little sheath that holds everything in place, and it is here. There appear to be versions for 2 and 4 pins (4 pin one shown)