Hi everyone,
My son has the above bike, riden it for 3 years over 4000 miles and a few days ago it started making a god awful noise, after stripping it down we found there are very little to no teeth left on the nylon planetary gears. They can easily be replaced but we are struggling to find them. They are 33T and we believe they measure 42mm (with teeth) and are 10mm wide.
Ive read a couple of posts reagarding others with the same issue and none had resolutions so we assume you cannot obtain the gears on their own so I think our only choice is to take a punt on a second hand wheel which is around £200, or possibly replace the hub along with controller, throttle, etc... which could work out cheaper and a possible upgrade? - The bike is a 36v and has been well looked after so we dont really want to shelve it.
Would anyone be kind enough to share suggestions.
My son has the above bike, riden it for 3 years over 4000 miles and a few days ago it started making a god awful noise, after stripping it down we found there are very little to no teeth left on the nylon planetary gears. They can easily be replaced but we are struggling to find them. They are 33T and we believe they measure 42mm (with teeth) and are 10mm wide.
Ive read a couple of posts reagarding others with the same issue and none had resolutions so we assume you cannot obtain the gears on their own so I think our only choice is to take a punt on a second hand wheel which is around £200, or possibly replace the hub along with controller, throttle, etc... which could work out cheaper and a possible upgrade? - The bike is a 36v and has been well looked after so we dont really want to shelve it.
Would anyone be kind enough to share suggestions.