Help! carrera vengeance e bike

[tommyh7]

OK thanks I will order that one from Ali express

 

[Nealh]

OK thanks I will order that one from Ali express

Before buying message the vendor and ask if it is Lishui compatible or ask if it is a KM display.
Alternately you can try ringing Woosh bikes and asking if they have one they might sell as they exclusively use in the main Lishui electronics.

 

[tommyh7]

I will do thanks again

 

[tommyh7]

hi manged to get a display but same issue when you ride the bike the motor is fine for 5 min then display switches off then you have to switch back on then same again after 5 min

 

[Nealh]

A link tot he display you purchased.

 

[tommyh7]

no link it was a friend of a friend how had a carrera vengeance how has the same bike we just swapped it over from his working bike same issue so i tried the display on his bike no issues all working

 

[tommyh7]

i would have tried his battery but he lost his keys so could not swap it over

 

[tommyh7]

right i don't now if this is the right way to turn on a carrera vengeance as i have never had one but it is working now what i did is turn it on but at the same time hold done the mode button the 4 lights come on and then they stayed on showing full battery pressed the mode button 123 no problem now all working

 

[tommyh7]

can some one confirm thanks

 

[tommyh7]

this is a question for a friend he two has a carrera vengeance as well but he lost his key he has drilled the key barrel out he was wondering if any one knows were he can by the barrel from thanks

 

[TopEParts]

my friend has a 36V LCD8H Meter With 5pins Waterproof Connector would this work with the bafang hub or not thanks

According to your shared pic, the right display for your ebike should be LED 790 display, not others. Some of the display is too similar, but be sure that the 790 LED display should be the right one.

https://topeparts.com/product/790-r-led-dis-play/

 

[Nealh]

It's an old thread so might be pointless replying . In the end he tried a kt display which didn't work, this was explained to him as not compatible with his LSW controller but he seemed to not listen to the advice.
We never did get a final outcome from him.