Brake cut off query

[wheeliepete]

Can I connect a 3 wire brake cut off to a 2 wire connection on a KT controller?

 

[danielrlee]

Yes, but you will need to source 5V from elsewhere (throttle or PAS) to power the sensor.

 

[Nealh]

Which KT are you using as all my dual voltage controllers use 3 wire connector.

 

[wheeliepete]

Thanks danielrlee, had a feeling I needed a 5v feed, but was thrown a bit by the red and blue wires on the controller connector. Sometimes I think it would be easier if I was colour blind. All sorted.