Hi all , I'm new to electrical bikes but having serous problems trying to wire this up .
The bike worked ok but had been fitted with a thirty six volt led display that showed the battery was low as it's a twenty four volt battery .also it would only run on low speed presumably because of this .
I bought a brainpower kit with led matched display and it now shows a full battery but that is all that's ok .
I can only get the wheel to turn on the up and down power setting but it isn't turned off by applying the brake .
the peddle assist doesn't work anymore .
I'm good with motorcycle wiring but this is getting to me . Does anyone have a wiring diagram that works .
It's a hopper shopper front wheel powered with only three wires going to the motor .
Thank yoi
Andy
The bike worked ok but had been fitted with a thirty six volt led display that showed the battery was low as it's a twenty four volt battery .also it would only run on low speed presumably because of this .
I bought a brainpower kit with led matched display and it now shows a full battery but that is all that's ok .
I can only get the wheel to turn on the up and down power setting but it isn't turned off by applying the brake .
the peddle assist doesn't work anymore .
I'm good with motorcycle wiring but this is getting to me . Does anyone have a wiring diagram that works .
It's a hopper shopper front wheel powered with only three wires going to the motor .
Thank yoi
Andy
Attachments
-
1.3 MB Views: 4